VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
one2dmax
Reaction score
1,572

Latest activity Postings About

    • one2dmax
      one2dmax replied to the thread So some enlightenment please.
      There is risk of leaning out the #3 cylinder without the flash but some people have done it.
    • one2dmax
      one2dmax replied to the thread Wheels.
      These were not inexpensive wheels at $2500 for the pair. Hard to come by but light weight and strong.
    • one2dmax
      The 320mm and 6 piston Busa calipers work amazingly well. Normally we'd only use a single rotor and caliper to reduce both reciprocating...
      • 339449021_236958672124650_6002538226152194860_n.jpg
    • one2dmax
      one2dmax replied to the thread 1985 fork brace.
      The bottom of the 85-92 braces will be cast with 1FK while the 93-07 Braces will be something different (and not interchangeable)
    • one2dmax
      one2dmax replied to the thread Rear shock rebuild?.
      I have not taken one to get done. I almost need one that needs rebuilding to just take to my guy.
    • one2dmax
      Looks like Bill Bushlings bike (owner of Magnacharger that died a few years ago in a plane crash).
    • one2dmax
      one2dmax replied to the thread Supercharged carb modification.
      My experience is that the 2 barrel works superior to the 4 barrel on these units. Here's info on that unit from another supercharged...
    • one2dmax
      He has several of our mods on there. Some I think are a bit exaggerated on price. They will make the bike more fun (and even safe) to...
    • one2dmax
      one2dmax replied to the thread Valve Clearance Gen 2.
      Thus the 2hp gain he told me about.
    • one2dmax
      one2dmax replied to the thread supercharger belt walking off.
      Might have to email me again and I can give you an email for a guy that's had many of these set ups. Might be able to help with any...
    • one2dmax
      one2dmax replied to the thread Cataracts.
      I had lasic done and was also nervous. Thankfully I only needed one eye corrected and it's held up for close to 20 years now. As I get...
    • one2dmax
      one2dmax replied to the thread Valve Clearance Gen 2.
      I think they were web cams and their drop in cams (10 years ago). The gain was a whopping 2hp. Not exactly worth the spend.
    • one2dmax
      one2dmax replied to the thread FRONT FORKS DILEMMA!.
      We've done plenty of inverted kits over the years for customers with a variety of forks though the 02/03 R1 seems to be the best overall...
      • thumbnail.jpg
      • user15023_pic10524_1477863051.jpg
      • IMG_20180602_132015.jpg
      • USD_Vmax_005.jpg
    • one2dmax
      one2dmax replied to the thread FRONT FORKS DILEMMA!.
      Another simpler option is to use progressive springs. The stock are also progressive springs but a much lighter rate. I have found the...
    • one2dmax
      one2dmax replied to the thread Valve Clearance Gen 2.
      Depends on your budget and desired. If you bother getting them changed then you may as well change the profile anyway. BUT, I am not...
  • Loading…
  • Loading…
Back
Top