Recent content by Max Mike

Looking for one of Jon's rear rims, 17" or 18" (18" preferred) to fit a Gen1 Max. Nothing bent. Tips or leads appreciated.

Interesting thread as I`m going through these same issues with my `88, specifically no gauge sweep beyond the first `slash` off of C, what seems to be a hot motor and a cool rad. - Checked the thermostat...unsure so changed it out as system was apart already and unit was cheap. - Checked the...

I hit the entire area with brake clean and wiped it down so the source may show up better when I start it up again. As far the wind pushing the oil; it wasn't being ridden at the time. The confusing part is there was no earlier evidence of a leak...happened out of the blue as it warmed up in...

Wouldn't that result in oil leaking out past the bolt threads to the intake manifold oil ring on the mating surface and from there down between the cylinders? The bolt is no where near long enough to protrude to the location where I'm seeing the oil leaking from.

Hi everyone, I'm a new member out of necessity! I need to pick the collective brains of the forum. With no previous issues of any type I started up my '88 Max and while letting it warm up noticed a bit of smoke from the front left, oil dripping from the left front motor mount onto the pipe. I...