Search results

Problem solved! The little black box died. Installed a dynatec and I have my bike back. COPS mod is next.

I forgot to check my coils and I have 0 reading on the secondary coil and it seems my plug wires have no continuity so I'm opting for the COPS mod to fix both problems. Any comments?

It seems that all my electrical checks are good meaning that it is looking more and more like my igniter unit. If I replace this with a dynatek 3000 will this solve my problem?

I have went through the bike and cleaned all contacts I could find Battery while cranking is at 11.2 volts so that's also not a problem. ninjaneer some of the items you mentioned would not alow for the starter to crank. It cranks just fine but still nothing. I just don't understand if it was...

You made me second guess myself so I went out and re did the test and still no spark.

Thanks for your response, I disconnected the black wire from the connector, cutting the wrong wire would be bad. But still it does not start.

I did test to see if I was getting spark from the plugs by pulling one and seeing if it fired. But it did not! I have been looking around at all the posts and have tried many things from checking the ohms from the stator all at .7 ohms. To the pick up coil 102 ohms. I even fixed the crimp...

It was shipped by boat!

I have a 1996 v max and up till I shipped the bike from overseas it was running like a top. But after being in a crate for 2 months void of oil and gas it will not fire up. It has a fully charged battery cranks just fine but does not fire. Filled with fresh oil and gas, I removed the spark...