Vmax Heads on Venture block

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thor_eyerdhal

Well-Known Member
Joined
May 9, 2011
Messages
367
Reaction score
1
Location
Paris (FRANCE)
Is it possible to put Vmax heads with their bigger valves on a 1300 Venture block without major issues?

What mod are required? Notching pistons?
 
Exactly, swap the vmax heads and cams. Then the flywheel and pickup (if different year range 85-89 or 90-07). Then the PCV, shift shaft, and some other misc. If you use the Venture side covers you need to swap the support bushing from the stator cover (where the shifter exists on the venture) to the mid gear cover (where it exits on the vmax). Swap the oil sending unit and the nuetral sending unit (or custom wire it in to have indications for all gears). Some other misc too but not much.

Sean
 

Latest posts

Back
Top