Decter
Well-Known Member
Any idea where I can get my hands on some of those clamp caps?
California Model
- Thread starter Decter
- Start date
-
- Tags
- california model
Help Support VMAX Forum:
[email protected]
Well-Known Member
3/16 vacuum line cap and clamp from the auto parts store should work
DMAN999
Well-Known Member
Exactly.
I replaced my stock rubber vacuum caps a few years ago with some generic vacuum caps from Auto Zone with the OEM clamps on them and they worked great.
Decter
Well-Known Member
Worked like a charm. Thank guys!
Capped it off, and going to re-route the line down the back swing arm or straight down between the exhaust.
My bike is now free from the evils of its' California upbringing.
Nick
Capped it off, and going to re-route the line down the back swing arm or straight down between the exhaust.
My bike is now free from the evils of its' California upbringing.
Nick
Ken76
New Member
I know this is a really old thread, but the cams are different in a CA Vmax. I tried to use CA cams in the front cylinders with limited success. The bike would run. But, it was weak and when you turned the engine over by hand there was quite noticeably 2 exhaust valve openings. With a 180 degree crank you should only hear one big exhaust release. I changed the cams and it was a Vmax again.
Man I never heard of that before. I bes Sean will be able to say. I know the carbs are a bit different. You can use the CA carbs on a 49 state bike though. I have.
I checked for a '05 bike, the prefix for the cam 1 and cam 2 for CA is 2WF
https://www.partzilla.com/product/y...?ref=9b1629adfc82aaee735eb580b24e3dc61f1e37e9
https://www.partzilla.com/product/y...?ref=9b1629adfc82aaee735eb580b24e3dc61f1e37e9
The prefix for 49 state models
cam 1 3JP
cam 2 1FK
https://www.partzilla.com/product/y...?ref=9b1629adfc82aaee735eb580b24e3dc61f1e37e9
https://www.partzilla.com/product/y...?ref=9b1629adfc82aaee735eb580b24e3dc61f1e37e9
https://www.partzilla.com/catalog/yamaha/motorcycle/2005/v-max-vmx12t/camshaft-chain
I checked for a '05 bike, the prefix for the cam 1 and cam 2 for CA is 2WF
https://www.partzilla.com/product/y...?ref=9b1629adfc82aaee735eb580b24e3dc61f1e37e9
https://www.partzilla.com/product/y...?ref=9b1629adfc82aaee735eb580b24e3dc61f1e37e9
The prefix for 49 state models
cam 1 3JP
cam 2 1FK
https://www.partzilla.com/product/y...?ref=9b1629adfc82aaee735eb580b24e3dc61f1e37e9
https://www.partzilla.com/product/y...?ref=9b1629adfc82aaee735eb580b24e3dc61f1e37e9
https://www.partzilla.com/catalog/yamaha/motorcycle/2005/v-max-vmx12t/camshaft-chain
Last edited:
