Lew L
Well-Known Member
I took the "Y" off my Max today and after the bike was warmed up, it would miss at about 6000 RPM. It ran fine just a day ago. It didn't matter which position the T-boost switch was in. Low speed is just as normal---- very good.
So I've put the "Y" back on, checked the plugs and replaced the spark plug wires. I also replaced the fuel filter---- which didnt look dirty but the paper portion had detached from the metal inside the filter.
If it still misses I guess i'm into the carbs as that bad filter may have let plenty of crap through.
Any of you guys had that high speed miss and how did you solve the problem????????
"Thanks in advance,
Lew
So I've put the "Y" back on, checked the plugs and replaced the spark plug wires. I also replaced the fuel filter---- which didnt look dirty but the paper portion had detached from the metal inside the filter.
If it still misses I guess i'm into the carbs as that bad filter may have let plenty of crap through.
Any of you guys had that high speed miss and how did you solve the problem????????
"Thanks in advance,
Lew