intake bolt leaking

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

maxrom

Well-Known Member
Joined
Mar 9, 2010
Messages
561
Reaction score
1
Location
Rimouski, Qc, Canada
Hy,
-Had to remove the four carburetor intake grumet
-There is at least two taped hole communicating with engine oil pass
-when rebuilding, two prevent oil leak
-Wath stuff should be used in these filet :ummm:
Regards
 

Attachments

  • intake.jpg
    intake.jpg
    101.2 KB · Views: 27
make sure you put the short bolts back in the leaking holes with some sealant on them. the longer ones will bottom out and never seat properly.
 
Back
Top