Morley carb kit - final settings (hopefully)

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

maleko89

Moderator
Staff member
Moderator
Joined
Mar 30, 2006
Messages
6,932
Reaction score
362
Location
Gretna, NE
I noticed a lean surging from 4-5000 rpm so lowered PAJ2 to Mikuni 165. Also, when romping on it at 4-6000 rpm there was some good vibration so I raised the needle to 2 1/4 clips....up from 2. I haven't tested that yet, it's raining pretty good right now. So...here's what I have.

Mark's 4-2 exhaust with 14 inch cans
Morley's airbox
main air jet correctors
Mikuni 165 PAJ2
Mikuni 152.5 main jets
DJ springs
Drilled slides
DJ needles, 2.25 clips
Open vboost
dual crankcase breather

I went for a poker run all day Sunday. Two tanks of gas...first take I got 40 mpg and the second 44 mpg. I can give the bike full throttle in 5th gear, it'll pull just fine down to 1500 rpms....not that I'd ever do that.
 

Latest posts

Back
Top