GSXR 600 Conversion

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The last one I've made. No more I will.


Up to sell the 17 inch sportbike, very light rim from kasasaki.
6 inch width, fitable with 190 or maximum 200 with tyre.
The rim is blasted and ready to paint or polish.
I cant say thats new becouse when it was kawi it was not new but, it was never driven on v-max.
So its new and its not new :)

Swingarm must be notched to proper install. I think it will fit without nothing but its not recomended to run a 180 tyre on 6 inch rim.
Please ask me about detailed notching!

Clucth hub, new beraings, spacers, rotor adapter, custom caliper stay and rear caliper in good condition with almost new pads - INCLUDED.

Dust cover not included.


You will need to install that rim into notched and braced swingarm, swap your rotor and dust seal and happy with radial on the rear.

Instalation guarantee!
If you can welding i will help you to brace the swingarm by yourself, its nothig
that you cant made.
Or just contact Sean Morley for the notched and braced swingarm
ready to bolt on.

Im asking 500$ plus shipping, around 80-90$ to ship to the USA.
Long time members are obligated to ask about discount!!!

dsc057550.jpg

dsc05757te.jpg

dsc05758p0.jpg

dsc05761a.jpg
 
Ok so swingarm is reserved with a 6" rim.

I have a 5,5" for sell now, exactly that one I showed in this thread.
Same price, almost the same rim.
5,5 can be equipped with 180 tyre so it can be fit onto unmodified swingarm.

Also if someone is interested i have a venture diif which I also wish to sell.
But I would like to not sell the diff separatly.
 
I cannot wait to publish better pics of the rear setup Prez sold me.
I did put a Metzeler Roadtec z6 190-50 on it.
Just waiting for the bike to be fully done for publishing some HQ pics.

But I can already confirmed that I looks damned good and handle very well.
 

Attachments

  • IMG_7206.JPG
    IMG_7206.JPG
    191.4 KB · Views: 66
  • IMG_7207.JPG
    IMG_7207.JPG
    233.4 KB · Views: 65
  • IMG_7210.JPG
    IMG_7210.JPG
    186.1 KB · Views: 60
  • 188509_1931081477251_1248675848_32424495_1952513_n.jpg
    188509_1931081477251_1248675848_32424495_1952513_n.jpg
    27.1 KB · Views: 55
Thx Mika!
Glad You are enjoying!


Important question to all!



Does anybody CANT see the pics which are supouse to be visible here?
Posts 26 and 28 cointains the pics!
 
I cannot wait to publish better pics of the rear setup Prez sold me.
I did put a Metzeler Roadtec z6 190-50 on it.
Just waiting for the bike to be fully done for publishing some HQ pics.

But I can already confirmed that I looks damned good and handle very well.

Nice setup. I take it your swingarm is notched . Can give me an idea of actual width of your Metz 190? I'm trying to get a feel if they're slightly bigger or smaller. I want to use 1 but it's going to be close!

Dale #2592
 
Nice setup. I take it your swingarm is notched . Can give me an idea of actual width of your Metz 190? I'm trying to get a feel if they're slightly bigger or smaller. I want to use 1 but it's going to be close!

Dale #2592

The bike is not with me right now, since it went for a new paint.
But I will measure it and give you an idea of the clearance and let you know as soon as I get it back.
The swingarm is notched and braced and the rim is the 6" sold by Prez.
 
The bike is not with me right now, since it went for a new paint.
But I will measure it and give you an idea of the clearance and let you know as soon as I get it back.
The swingarm is notched and braced and the rim is the 6" sold by Prez.

thks....mines notched but not really deep. I want to try a 190/55-17 on my Kosman wheel. I know it'll be a tight fit.

Dale #2592
 
i'm doing a 190/50/17 on my 17" kosman

Garrett, on mine it looks like I'll have room on the brake side (might hit the brake bar) but really tight on the drive side. I haven't bought a tire yet. Did you have any problems fitting yours in?

Sorry about butting in on this thread!


Thks,
Dale #2592
 
Hello from Finland
Prez put pictures of my bike here. It's okay. It is 200/50 Shinko tire I do not know whether it is good, hopefully. Rim appears to be good and powder painting was wonderful. Space should still tire 210, the size is rare enough. Waiting for the summer !!!!!! Sorry my english is what is I dont now what is.I used to google translator!:ummm:



Kraves
 
Hello from Finland
Prez put pictures of my bike here. It's okay. It is 200/50 Shinko tire I do not know whether it is good, hopefully. Rim appears to be good and powder painting was wonderful. Space should still tire 210, the size is rare enough. Waiting for the summer !!!!!! Sorry my english is what is I dont now what is.I used to google translator!:ummm:



Kraves
Great looking bike Kraves! Translation is good!:clapping:
 
Garrett, on mine it looks like I'll have room on the brake side (might hit the brake bar) but really tight on the drive side. I haven't bought a tire yet. Did you have any problems fitting yours in?

Sorry about butting in on this thread!


Thks,
Dale #2592
stock swingarm or notched?
 
stock swingarm or notched?

Notched. Dry fit the wheel today looks like I have from c/l :96 mm to drive side and about 105 mm to brake side but the brake bar will only allow 101mm.

Could you fit the 190 in without loosening the pumpkin?

Dale #2592
 

Latest posts

Back
Top