Cobra Slash Cut Muffler Baffle Removal

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Biker Dash

Well-Known Member
Joined
May 19, 2013
Messages
1,584
Reaction score
3
Location
Waterville, Maine (Equestria)
Looking at my Cobra Slash Cut mufflers, it looks like the baffles are just welded in from the outlet end.
Single weld, as seen in this image
20150626_164244_zpszswqcvig.jpg


It would be nice if they could be removed. Is it just this one weld per muffler that holds the baffle inside the can? I would very much like to be able to wrap them to help make them less loud at highway speeds. (When I'm usually between 5k-5500 on the tack)
 
Looking at my Cobra Slash Cut mufflers, it looks like the baffles are just welded in from the outlet end.
Single weld, as seen in this image
20150626_164244_zpszswqcvig.jpg


It would be nice if they could be removed. Is it just this one weld per muffler that holds the baffle inside the can? I would very much like to be able to wrap them to help make them less loud at highway speeds. (When I'm usually between 5k-5500 on the tack)

I don't know if you ever got your answer. I tried taking mine out & there are 2 welds on the other end. As of right now I got one off & gave up on the other.

Dave
 
Back
Top