bleed the clutch or rebuild

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

andrewb2332

Member
Joined
Mar 14, 2015
Messages
15
Reaction score
0
Location
South Bend, IN
I was trying to bleed my clutch and I was doing it for like an hour, and got no lever at all, fluid was coming out but not a lot like no pressure really. I was wondering if I should try to clean it or just rebuild it
 
Look for the reverse-bleeding method which was just mentioned. Do this and you can change the fluid in both sets of brakes, front and rear, and the clutch in the same amount of time you just spent. You should do that once a year as preventative maintenance to remove water from your brake system, as DOT 3 and 4 are hygroscopic, they absorb water over time, which can then lead to corrosion of your brake and clutch systems.
http://www.vmaxforum.net/showthread.php?t=37602&highlight=reverse+bleeding

I was trying to bleed my clutch and I was doing it for like an hour, and got no lever at all, fluid was coming out but not a lot like no pressure really. I was wondering if I should try to clean it or just rebuild it
 
Back
Top