intake bolt leaking

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

maxrom

Well-Known Member
Joined
Mar 9, 2010
Messages
561
Reaction score
1
Location
Rimouski, Qc, Canada
Hy,
-Had to remove the four carburetor intake grumet
-There is at least two taped hole communicating with engine oil pass
-when rebuilding, two prevent oil leak
-Wath stuff should be used in these filet :ummm:
Regards
 

Attachments

  • intake.jpg
    intake.jpg
    101.2 KB · Views: 27
make sure you put the short bolts back in the leaking holes with some sealant on them. the longer ones will bottom out and never seat properly.
 

Latest posts

Back
Top