setup

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. vmax2extreme

    RAM AIR SCOOPS w/VGAS Carb setup

    UFO RAM AIR Scoops with VGAS carbs setup. Scoops are primed so that you can paint them to match your color scheme. Comes with everything shown in all the pictures for the setup. RAM AIR Scoops, VGAS carbs, Throttle cable sets, intakes, and all shown hose assembly. All shipped within...
  2. L

    Cobra Exhaust Tuning Set-Up Experiences Please

    G`day All from Australia, attached a pic of my bike for anyone interested.... Firstly, all the evidence points to losing 10Hp with the VMax & Cobras combo... I get that, so, moving on..... I like the look and the sound and would like to persevere with them regardless..... Anybody like to share...
  3. K

    Touring Set-Up

    I do quite a bit of touring on my bike. My wife and I like to get away for a couple of days at least twice a month, so I have added a few things to make it more practical, such as a Givi hard luggage, twin horns and running lights fitted to the crash bars, a very bright L.E.D. additional 'high...
  4. CaptainKyle

    Gen 1 whipple supercharger setup

    Complete whipple supercharger setup for gen 1 85-2007 Vmax . $ 2300 FIRM It includes everything you need not every part is pictured but it all comes with it nothing else needed. It comes with 2 pulleys 1 for a stock motor produces 6-7 pounds of boost and one for a modified motor produces over 20...
  5. hexec

    Need some guidance with best carb setup.

    1985 Vmax Canadian version so it has the stock adjustable needles. Everything is stock. Well not exactly. The exhaust has been punched out to get a better sounding max. I took the carbs off last winter and cleaned them all out. Every passage and jet was cleaned with seafoam and air blown...
  6. M

    Supertrapp setup

    Hi I have,what I'm told is a Canadian spec (55mph in red) with V Boost imported direct from Japan. It has 4/2 stock headers running into Supertrapp cans. Because the bike seemed to be running badly at lower revs.It smells rich and is uneven (but beautifully smooth when the revs rise) , I...
  7. D

    Tour Tank Setup

    Ok, guys. I've got my stuff all together and have put about 500 extra miles on in the last two weeks. Here's what let me do that with only three stops for gas. I ordered an 8" aluminum fuel tank from http://www.coyotetanks.com/8inchendfillertanksusa.html I did not get the "Tour Tank" one...
  8. D-Max2012

    Question about Air intake and setup

    Hi Guys, I've been trying to get my 91 running right since I purchased it 2 years ago. The PO just modified shit for just for doing it.. He told me that he used the bike around town. To me, why do performance mods, if your going to just putt around town. Leave the Beast Max alone and get a...
  9. D

    Possible custom EFI setup in the future

    I have been talking with my buddy who has successfully built a few EFI systems for sleds and the like. He is an electrical genius and can build all the computer and electrical interfaces we need supposedly. I might give this a go over the winter but am trying to do a little more research on...
  10. scuff

    Carb and Pipe setup suggestions Anyone?

    Ok so I am a new owner of a 94' V-max. I have all the little stuff taken care of now so it's on to bigger things. My bike came to me with Cobra slip on's with stock header and Stage 1 carb setup at least that's what the previous owner said about the carbs. Well the bike doesn't seem to run as...
  11. S

    Carb set-up

    Hello maxxers , Is the morleys airbox mod and jets/etc the preferred system? ( over the stage 7 ). Do both kits require the slides to be drilled? Thx and hello from NZ, only 21 days till we're off to the Burt munroe event :rofl_200:
  12. W

    suggested jetting for my setup

    I know it has probally been discussed ALOT, but I am currently running supertrapps with open end caps, and was considering removing the Y on the airbox. From what I have read is that I should go down one size on the mains, and re sync and it should be good. Is that all there is to it? Where do I...
  13. A

    What size main jet for stock setup with full exhaust

    Danny has my carbs and I was wondering what a good size main jet is to start out with on a all stock drive train minus a full length UFO 4-1 exhaust. Thanks
  14. Kronx

    How did you setup your clutch lever?

    Still considering myself a newb to VMax and still considering myself rusty on the riding, I've really been trying to nail down the perfect shift on my VMax. It's definitely gotten better since I first bought my VMax. I've progressed from a clunk to a nice snick. But I want better. :) So this...
  15. N

    Can anyone identify what header setup I have (4 into 1) full exhaust header+slipon

    Came with the bike. Also just found a K&N filter, and the vboost 3000rpm switch as I installed my manual fan switch today.. I'd assume the p.o. also did a stage 7 or equivalent kit, since this exhaust is very free flowing and pretty loud. Also, It is silver, natural finish, but they sprayed...
  16. wildweasel_pt

    Gen 2 rear shock setup

    Hi guys I was wondering if someone is able to give me a sketch of the rear shock setup with dogbones/links and such or several pictures where i can check that out. That would be a great help for something im working on... Gen 2 guys please step up... Thanks in advance... Cheers
  17. vmax2extreme

    Holeshot 4 to 1 setup?

    I just installed one of these old Dale Walker Holeshot (Hindle) true 4 to 1 full exhaust systems. I am curious to know what others are running for their carb and airbox setup. Thanks.......
  18. Karmakatt

    Full Gear set-up: RSD, D3O, Kriega, Icon 1000

    Hi Fellas- I ordered a bunch of Gear from Revzilla yesterday.. They gave me great ideas based on what I was looking for, what I ride and after many emails and 2 phone calls, this is what I chose: Roland Sands Barfly Leather Jacket Roland Sands Design (RSD) CE Rated Elbow&Shoulder Armor...
  19. vmaxrooky

    suspension set-up

    Ok I have a 98 VMAX have progressive forks springs lowering kit lowered 1" so should I get progressive rear shocks 13" , 12.5" or 12" want bike to handle good in twisties... I'm 220LBS. so should I get the heavy duty springs or regular springs? The wifey rides with me more than usual cause she...
  20. KJShover

    Clean set-up

    But, I hope something was done about the fuel supply. Or the system is not done getting put together. Don't think the pistons are going enjoy a straight hit, of nothing but the squeeze, too much. It's a nice and clean setup though. .
Back
Top