vmax

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    1st Gen V-Max New to the forum - My VMAX

    Hello All, I've owned this bike since 2016 and 2nd owner. It's hardly driven, but a joy to ride.
  2. stevevmax69

    VMAX THUNDER RALLY 2024(formally VMOA THUNDER IN THE VALLEY)

    THUNDER IS ALL SET TO GO! @ THE RED ROOF INN 220 Waterworks Dr, Somerset, PA ☆☆☆BOOK YOUR ROOM ASAP FOR THE VMAX THUNDER RALLY *CALL THE RED ROOF INN DIRECTLY @ 814-445-1818 (MUST USE ONLY THIS #) ***CALL BETWEEN 8AM-4PM ☆☆☆MENTION YOU ARE WITH THE "VMAX GROUP" TO GET OUR RATE. *GROUP RATE IS...
  3. O

    Hello, VMAX Community!

    Hey, lucky VMAX owners! I'm new to a community, don't own a VMAX yet, but would love to. I live in Chicago area, so if anyone considers or knows someone who is selling their VMAX 1700 in Illinois (or neighboring states) please let me know, I'll highly appreciate it! P.S. Currently enjoy Suzuki...
  4. John Henderson

    1st Gen & 2nd Gen Christmas lights or paint setup on VMAX

    Alcon, Have there ever been Christmas light setup competitions or is this just a bad idea on motorcycle and getting unwanted attention from cops? Anyways a competition for best running drivable VMAX Christmas setup? Yes No?
  5. dtbalog

    Sold 2020 VMAX 1700

    $18,000 Location Easley, SC Original owner. All stock 2400 miles Title in Hand Pristine and garage kept. No trades, cash or wire transfer ONLY. 813-967-0441
  6. S

    Sold 2014 Yamaha VMax 1700 For Sale - (SOLD)

    2014 Vmax, clean WA title in hand, very well maintained & never laid down. Always kept on a battery tender, tires are in excellent condition, fresh clutch. All the best power mods dialed in with a proper dyno tune, runs absolutely amazing and needs nothing. Fresh Barnett Carbon Fiber Clutch...
  7. stevevmax69

    VMAX THUNDER IN THE VALLEY- ROOM RATES AND INFO UPDATE

    IT IS OFFICIAL... THE ROOM RATES FOR THUNDER HAVE BEEN SET!. It was a lot of back and forth and more, over the past several weeks, but my continued efforts have paid off. I've been working directly with the hotel owner to discuss and plan everything. He has agreed to the very fair rate of only...
  8. B

    Motorcycle Wanted Wtb gen 2 VMax

    Been searching for a low mileage Gen2 for a while now. I want to purchase from a vmax owner, not a dealer or flipper. Partial to 2018-2020 but open to other years. I am ready to purchase now if the right bike is out there.
  9. tina vaako

    Vmax font/script

    Hi I am trying to make a cool gift for my bonus dad that own a Vmax so I have been thinking about making some merch with his nick name on it and I want it to be in vmax font/script. I downloaded a link I found on this page but they only made v,m,a,x inn "vmax" font/script not the whole alphabet...
  10. 1986davester2010

    Just signed up from Ohio

    I was a member years ago on here but changed my email and all that.I’ve owned my 1986 Vmax since 2008 and last July I flew out to Iowa to buy my 2010 on the 4th of July and rode it 640 miles home.the seller was the original owner and had bought it in 2016 still in its crate and he owned it for 5...
  11. D

    2000 VMax Breather Pipe Issue

    Hello I have an issue where the breather pipe that is located in the sump (see photos) does not align with the hole. If put in on the o ring side it does not fit as it doesn’t reach, the other way around and it would need a spacer for the bolt but that seems wrong? Ordered a new pipe and it...
  12. Denci

    Parts Wanted Looking for COPs setup

    Hey guys I am looking for a set of COPs, My bike is a 1998 so my understanding is I don't need to run resisters. If anyone has a set please let me know. Also I would prefer Denso over Mitsubishi. I have a slight stumble when I punch it. It doesn't happen if I am just rolling on the throttle just...
  13. T

    Vmax 1200 cc 2001 bad earth connection

    Thanks to everyone that contributed to other thread i created about having hot start issue with my vmax Vmax first Gen hot start issue. After going through the tips on the thread, someone suggested most likely the issue is due to bad earthing. I took a look at the bike by removing the seat and...
  14. vmaxlinedrawing.jpg

    vmaxlinedrawing.jpg

    Vmax line drawing gen 1 VMX1200
  15. Bradley Dunagan

    Ignition Pickup Coil

    I had a post a while back with questions about this same issue With no response. I hope this one does better. Has anyone ever had their ignition pickup coil fail? If so can it cause misfire like running off timing or does it just stop working altogether? I’m rebuilding the carbs for the third...
  16. Matt murphy

    Gen 2 parts for sale

    Have some parts for sale if anyone's interested, all oem See pictures, have some other parts aswell, driver's seat, air scoops, brake light, head light, decat pipes(delkivic), new master cylinder, pm what you need, I might have.
  17. D

    2003 yamaha vmax 1200 for sale

    2003 yamaha vmax 1200 for sale in nw Iowa. Engine was built by Sean Morley and completely rebuilt with new bearings rings and seals and a heavy duty overdriven oil pump. The transmission was rebuilt with hardened and undercut gears and a 5th gear overdrive was added for low rpm highway cruising...
  18. S

    2003 YAMAHA VMAX 1200cc for Sale

    2003 YAMAHA VMAX 1200. Runs great. Truly a beast of a motorcycle. Has a couple of scratches here and there but in great shape for its age. 1200 cc Carbureted Liquid Cooled 10,709 miles (will increase as I ride) I had a complete check over with oil change and coolant flush two years ago at a...
  19. F

    1988 vmax purchase

    Hello, gang. I've always wanted me a vmax and I'm really considering grabbing this 1988 vmax since it's finally one I can reasonably get my hands on atm. I'll look it over as best I can, of course, but I'm wondering if some of you more experienced folks have some specific things I ought to look...
  20. O

    2009 VMX17 Sale or Trade

    Very clean 2009 VMX17 VMax. It's a little heavier than I prefer, though I quite like the upright riding posture and the MONSTER motor (easily the most powerful I've had in 50+ years of extensive trading/riding). No known issues, always garage kept, good tires (rear almost brand new)/fresh fully...
Back
Top