tap

Sent from my SM-N920T using Tapatalk

Hey guys, I would like to check the oil pressure on my newly accquired Vmax. Can someone point out where on the engine that I can tap to check oil pressure, so I can determine the condition of the oil tube o-ring. Also, what is normal oil pressure hot, idling and with some higher rpms...

I need to tun a tap through my swingarm mount points and probably put the bolts through as well. Apparently the first thread on the left side is smashed down and won't let the bolt go through freely. I really don't feel like I should ruin a perfectly good set of swingarm mounting bolts just so I...

Vacuum / nitrous port. How to drill & tap So my new intake manifolds don't have sync ports.. or anything drilled and tapped for the vacuum advance. Can anyone give me some tips on drilling thin cast aluminum and tapping threads?:confused2:

Does anyone know what metric tap size is needed to get the shock mount from my Vmax to go into a 1999 Venture final drive. I tried to find a 86-93 Venture final drive to no avail, so I'll have to drill and tap the shock mount on this one. Thanks,

One of the carbs on my 85 max has a screwed up air/fuel mixture tread in the carb. I measured the pitch and it is .5(really fine pitch), But I am not sure the size. I think it is 6mm. Anybody had this problem. I can only get the air fuel screw down about 2.5 turns, so I know the threads in the...