tranny

I have a 2005 max with a strange problem. I'll try to give my interpretation of the problem with my limited knowledge. If I go through the gears gently the problem doesn't show up. If I nail it hard, it appears like I am tapping the clutch. The rpm goes up quickly and then it starts pulling...

just reinstalled the engine after repairing the transmission on a 06 1200 vmax. i started up the bike and realized that oil was leaking around part #24 on the hyperlink below...

Was shifting from first two second sound like somthing came apart in tranny then I noticed gear noise 4th-5th real bad noise leaks oil out drive shaft where it connect nice drip any idea.

I had trouble shifting into 2nd, 3rd, and 4th gear. While in these gears, if i hit the throttle higher than 1500 rpm, it would jump out of gear. The I could not shift into gear 2, 3, and 4 anymore. Only had 1st and 5th gear. Tore the thing apart and found that all the teeth on all gears...

hey vmax guru's.... could use a bit of assistance, just aquired a 85, purple, 19k miles, garaged sweet vmax. tranny appears to be screwed up and will not shift. I tried to do a search on this site but I got so many returns that reading all that would be a full time job for a month... Also, I...

Anyone out there that has been able to come up with dependable tranny setup for high hp max at strip. My bike has a 1500 tourmaster that has 174hp on motor and with nos it puts down 227 at tire with 145lb torqe.60 ft are in the high 130s ,bike goes 6.0 s to 5.90s at 119smph with signs of of...

I've noticed a lot recently that when I'm riding down the highway in 5th gear, say around 65 mph or so, if I hammer the throttle my engine revs all the way to redline. I can still feel the bike pulling, but something still seems to be awry. The revs eventually come back down to where they should...

i have an '85 max with no engine or tranny modifications. a few days ago i was riding locally and couldnt shift from 2nd to 3rd gear. it shifted only in 1st & 2nd gears. when i got home & parked it, i put it in 1st gear and covered it for the nite. the next morning i tried to shift it into...

http://thekneeslider.com/archives/2008/10/02/2009-honda-dn-01-is-in-the-us-lineup/#more-2557

hello...i noticed the tranny seems noisy on my 89 when going down the road.if i pull the clutch in it gets louder.everything operates normally,no slippage no hard shifting.lt's the most noticable in 2nd and 3rd.i have the dd clutch setup with about 700 miles on it.i took clutch apart,didn't see...

Well, I think I finally did it. After finishing my new clutch and double D mod the bike ran and shifted perfectly, I put about 150 miles on it since Friday and no problems other than I'm really not getting used to the lever effort like I though I would. Normal riding was fine but trying to...

Went for a ride today and the bike rn pretty good. It's still missinf when I get on it but I'm still running Seafoam through it. A problem came up with the tranny today. I came to a stop and put it in what I thought was first gear. Went to take off and it actually was in neutral. Riding it...

Anyone know what complete Venture tranny gears in a Max would behave like? I thought I saw someone post a comparison somewhere?

Looks like the 1300 venture has a lower 1st gear and higher 4th and 5th gears.Figured out it is a 1986 1300 from the serial number. the guy had told me it was a 1984 engine.I already knew that in 84 they were 1200's. Something else wild happened too,I found out that he was at Summerduck Va...