weep

'85 Vmax. Why is there water/coolant coming from this hole between the top and middle rib on the cylinder head? I've been flushing the old coolant out with a flush and now just staight distilled water. Second galon flushed through when I saw it bubbling out after a 10 minute idle warm up. Engine...

I just changed my rear valve cover gasket and converted to COPs ignition. Worked on it all day. It started right up. Ran about 5 minutes, then shut down. Oil started draining from the weep holes in the #1 and #3 cylinders (rear cylinders - on the side between the fins on the cylinder). It's...

I've been hunting down an oil weep that's been leaving a mess on my left exhaust pipe, not to mention the underbelly of the beast. I cleaned up the gunk with some degreaser and after monitoring the situation over the course of the past week or so, I jacked up the bike onto its centerstand and...

Hi all, I have 1986 Vmax. The problem is that the small hole below the spark plug channel is leaking coolent after it warms up. It is on the side of the cylinder head. Does any know where the coolent is coming for and how bad is it to fix. Thank for your help.