Go Back

Valentin's 1989 Yamaha Vmax
custom welded exhaust + wrapped copper thermal tape TermoTec, 7.9 lb weight
handmade triple trees and stem 7075 alu
handmade swingarm longer 7 inch
handmade carbon dashboard with integrated Motogadget mini scope
Autometer Phantom Tachometer with shiftlite
handmade fiberglass air scoops
Brembo RCS master-cylinders and Rizoma reservoirs
Frentubo brake lines
front brake rotor from ducati 996 + aluminum fully floating buttons kit
(Outer legs from Suzuki Hayabusa 2006, extended by 2.75 inches
Inner legs, dropouts, brake calipers and extended cartridges respectively 2.75 inches from the Yamaha R1 2007, result - front end 3.35 inches lower when stock)
Ohlins S36PR1C1LB YA137 rear shocks
Pro-Bolt engine aluminum kit
MEK CNC Footrest
DynoJet stage 7 and custom made velocity stacks
Carrozzeria wheelset
Frame reinforcement bars by Active racing
NGK Platinum spark plugs
Stock bore size, stock rods, stock cams, forged pistons 11.5:1
handmade Aluminum engine mounts + Ti Bolts
Barnett clutch kit
Ballistic evo 2 Li-ion battery
polish engine covers and custom paint
handmade seat lowering 2 inch when stock
remove center stand

total weight 480.6 lb
project is not finished and will be working on. The plans for the future - making aluminum gas tank, carbon fiber bars on the clipon, maybe supercharger ... and further weight loss
Some of the components described above are not shown in the photo (Old photo)
1411930_301545935.jpg esg_e_UGVe4.jpg 1411930_301545952.jpg 1411930_301545953.jpg 1411930_301545956.jpg 1411930_301545958.jpg
Powered by: vBGarage

Author Comment Date

All times are GMT -4. The time now is 05:39 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd. Exactrep
top of page