Media added by twistedmax

Navigation

  1. Example Category 23
Browse albums

Most media items

  1. Buster Hymen
    168

    Buster Hymen

  2. Rusty McNeil
    100

    Rusty McNeil

  3. DMAN999
    97

    DMAN999

  4. MaxMidnight
    97

    MaxMidnight

  5. ninjaneer
    96

    ninjaneer

Media statistics

Categories
1
Albums
1,241
Uploaded media
9,130
Comments
616
Disk usage
1.2 GB
Shop deals on ebay
shop deals on amazon
Advertise with us
VMAX Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
cover pattern traced on material, All hand cut.

cover pattern traced on material, All hand cut.

  • 0
  • 0
brackets before PC

brackets before PC

  • 0
  • 0
MaxGasser logo

MaxGasser logo

  • 0
  • 0
All perfect! Available in soft or firm.

All perfect! Available in soft or firm.

  • 0
  • 0
Inside of foam molds , require polishing and waxing on regular basis to keep foams coming out nice

Inside of foam molds , require polishing and waxing on regular basis to keep foams coming out nice

  • 0
  • 0
Rear foam mold

Rear foam mold

  • 0
  • 0
Wa la foam mold, hinged and with wooden wedges to hold it shut

Wa la foam mold, hinged and with wooden wedges to hold it shut

  • 0
  • 0
These are then covered with fiberglass as they will become the foam molds , very one the same Unless I change foam ratio's

These are then covered with fiberglass as they will become the foam molds , very one the same Unless I change foam ratio's

  • 0
  • 0
Then very carefully that" egg "needs to be fastend to a cardboard flange

Then very carefully that" egg "needs to be fastend to a cardboard flange

  • 0
  • 0
They need to work well together

They need to work well together

  • 0
  • 0
It needs to be symetrical

It needs to be symetrical

  • 0
  • 0
Alot of sanding and filling holes when you break through

Alot of sanding and filling holes when you break through

  • 0
  • 0
After you have shaped your foam It needs to be coverd with a VERY THIN coat of bondo. It becomes very fragile.

After you have shaped your foam It needs to be coverd with a VERY THIN coat of bondo. It becomes very fragile.

  • 0
  • 0
First rough foam

First rough foam

  • 0
  • 0
Once foam expands its shaped to your desire

Once foam expands its shaped to your desire

  • 0
  • 0
In shaping process

In shaping process

  • 0
  • 0
After foam expands and sets it can then be sculpted into desired shape

After foam expands and sets it can then be sculpted into desired shape

  • 0
  • 0
Foam expansion tank

Foam expansion tank

  • 0
  • 0
The Thin pan mold is installed on the bike and form poured on top

The Thin pan mold is installed on the bike and form poured on top

  • 0
  • 0
Those Bondo master molds are used to get the first thin pan.When pan proves out the master mold needs to be turned into a stronger fiber glass mold

Those Bondo master molds are used to get the first thin pan.When pan proves out the master mold needs to be turned into a stronger fiber glass mold

  • 0
  • 0
After you get the desired shape for your pan/pans , they need to be carefully removed from the bike

After you get the desired shape for your pan/pans , they need to be carefully removed from the bike

  • 0
  • 0
first you have to locat bumpers and hardware and cover with bondo.Then sculpt out your vision for a seat pan/pans

first you have to locat bumpers and hardware and cover with bondo.Then sculpt out your vision for a seat pan/pans

  • 0
  • 0
I was lucky with the gen I , I had a spare frame.

I was lucky with the gen I , I had a spare frame.

  • 0
  • 0
This will become the master for the pan mold.

This will become the master for the pan mold.

  • 0
  • 0
Back
Top