I am about to do an oil change in my 2004 and I would like to know what oil should I use my clutch pack was sticking after the bike has been sitting and I am thinkin g maybe due to none use and water in the oil
thanx
HI
I have a 2004 max and would like to change the headlight to a 7 inch round to fit a small fairing I have has anyone done this conversion if so What is needed and where can I get the parts
HI
Does anyone know the I.D. of the radiator hoses on a 2004 max. I am installing new speedometer from trail tech and that was one of the questions also I assume I would want to install it in the return form the radiator is that correct And which hose is the return ???
Thanx
Chris
OK
I had bought a universal fairing from j c whitney not realizing it fit a 7 inch headlight... Could you tell me exactly how and what you used for the conversion to a 7 inch headlight............Also j c whitney has two fairings that look pretty good but again they are for a 7 inch headlight
I just fired my vmax up today . I haven't started it in about 2 months it was fine. When I started it today one of the vent tubes that run up under the cowl cover was leaking gas pretting good. I suspect this is due to a sticky float but not sure. Can someone let me know there thoughts and if...
all the metal jacket is is a box something to do about when the battery gets hot it expands and the box helps keeping it from doing that you knpow all that engineering stufff lol
thanx guys if you go to the official site which is odysseyfactory.com they tell you quit abit about these batteries anything above 113 degrees they recomend the metal jacket and the recomend chargers that put out 14 to 14.7 volts thanx for the help a newbie max owner
I am thinking of putting a pc680 and it looks like they recomend the metal jacket is anyone running one of these batteries with out the jacket or with and how is it working out. they also recomend 14volts to 14.7 volts I am putting out 13.8. I know this is a lil bit low but does anyone else run...
I want to replace my current battery with someting heavier duty and probably a AGM battery. Does anyone have any recomendations I looked at odessy and panisonic