Recent content by Decter

Sorry to resurrect this topic, AGAIN. Sync'd the carbs with a DIY manometer and the bike seemed to be running beautifully. Left for training, again, and came back to it sputtering more now than it did prior to sync'ing it. Also, over the past year she has shut off on me a few times...

Sorry for the delay in response, uncle sam called for training. I did a bench sink thanks to some advice from mabdcm, and then followed up with a home made carb sync. Bikes is running great now with no coughing or any issues. Had a bit of a ping when I started it up after being gone, but I...

In retrospect, I did not so that with the restrictors. Do I simply attach them and put hose on the opposite side side going to the carb?

Tried it, either the diameter of the hoses was too large, or my Carb are WAY out of sync. 3 and 4 nearly pulled the oil into them before I killed the bike. Guess I will have to buy a Carb Sync Tool and go from there. Road tonight, RPM were changing without adjust either the idle speed...

May try to build this tomorrow to sync my carbs up. http://www.r6messagenet.com/forums/r6-how-guides/136367-how-make-your-own-carb-sync-tool.html Any ideas as to what fluid to put into it if it accidentally gets into the carbs wont cause any issues? Nick

Without buying a Carb Sync Tool, next pay period, is there a way to do a rough sync of the carb?

Worked like a charm. Thank guys! Capped it off, and going to re-route the line down the back swing arm or straight down between the exhaust. My bike is now free from the evils of its' California upbringing. Nick

Any idea where I can get my hands on some of those clamp caps?

So, use a cap and clamp on Carb 2, but leave the one on the top of the tank alone? Nick

I'm not really worried about it causing issues, I just wondered what a stock cylinder two and fuel tank look like. And, what, if any, suggestions other forum members have as far as how to close those two points off.

Sorry, finally got around to looking into the routing on my bike. I want to remove it, and I know Dannymax said to stopper it. I'm just wondering what a normal cylinder two looks like. Anyone have or willing to send a normal cylinder two and a normal top view of the gas tank with I have...

Beautiful bike, wish I lived closer I might take you up on it!

Just came across this: http://roadstercycle.com/yamaha_vmax_fuel_injector_cv_car.htm Any experience of thoughts? Nick

I took a good look at each, they were identical. I did notice one of them really didn't want to catch on the threads for a bit. And I accidentally left it "two turns" out from the peashooter. Seems to be running better that way though so... Any words of wisdom as far as where to put the...

I don't have a carb tuner, though I may get one. How difficult is it to tune a carb? Bike rode fine this AM, no issues and idle was nice and smooth. Just remembered I took a picture last night of one of my fuel mixture screws. Any ideas? This was the worst, though each had some level of...