Recent content by gtotiger1

Thats not a resistor in the LED buld its a diode !

You need to yank them off and clean the pilot jets unfortunatly, just had to do the same

how can I clean the pilot jet without removing the carbs, will the shotgun or pea shooter do it?

Hey guys , I believe I need to change the 4 carb intake boots on my '88, they're still original, while I can't seem to find any vacuum leaks on them with the spray test , the bike seems to act like it has a small one, I have noticed some seapage around them , particularly near the carb bases. My...

Hey guys , I believe I need to change the 4 carb intake boots on my '88, they're still original, while I can't seem to find any vacuum leaks on them with the spray test , the bike seems to act like it has a small one, I have noticed some seapage around them , particularly near the carb bases. My...

Done

I would love them, how much do you want for them? PM me please

That would be awsome, thanks let me know.

Hey guys , I believe I need to change the 4 carb intake boots on my '88, they're still original, while I can't seem to find any vacuum leaks on them with the spray test , the bike seems to act like it has a small one, I have noticed some seapage around them , particularly near the carb bases. My...

Great how much?

Ok guys who may have the best price on new carb and vboost intake boots? Tried ron ayres, but i think theyre a bit pricey

Checked for air leaks , looks good, all seated and tight, a/f screws are at 3.0 turns and yes af scews were removed and cleaned and in right order, oring / washer / spring / screw , i have tried to richen 1/2 turn , and lean 1/2 turn not much difference -- seems like almost a ignition miss? Any...

So i just took off my carbs last night and cleaner them, everything looked good and is now spot on, after re assembling the bike, i re synced the carbs and now when the bike idles it seems to miss fire at idle, more than usual, she seems to ride ok, but its a distinct pop and miss fire at idle...

Thanks i guess a breakdown is in order

The idle does not surge, its a bit loppeyer than normal it may be missing, i tried the propane trick, and found no air leaks at all, as for sync its spot on, synced it at 1500 rpms, the acceleration in the low to mid is a bit sluggish, but once it hits about 4000 rpms she pulls good