Recent content by mjsinil

I’m interested in the seat, is it still available?

I am interested in the seat. . Is it still available?

I'm still interested in the exhaust if you are parting out

I’m interested in the exhaust system. Let me know $$

Used a small cutting wheel on Dremel to cut it and then a cold chisel and hammer to knock it out. Even after I cut it, it took a few hard hits before it loosened up.

I just finished replacing mine. Getting the races out was a nightmare. But the difference it made was astounding. Pics of old ones, it felt like there was gravel in them.

I lived in Michigan for 13 year, so I have winter gear/cold summer gear for the ride. Heated gloves are nice, not probably needed for a summer ride around the lake. Hopefully the July weather is Michigan will be 70-80 degree days and 50’s at night, perfect riding temps.

Thanks, I'll try these this week. Planning a long trip this summer around lake Michigan with my brother. So I got a wind screen and saddle bags.

So, it's all done! Had it out for a ride yesterday. It ran great!!! Checked the compression and all cylinders now are at 155-160, big improvement from before rebuild, had two back ones with 0. Now big question, what to do with the vboost switch? It seems to idle faster when switch is to the...

I will have a few questions about the boost bypass and how to make sure it works or remove it to go back to stock

The interior is cedar boards from an old fence . The can has 2 springs attached to it, and yes the parts for the calipers are on order, so it'll be next weeks project. Always use fresh brake fluid.....👍

Everything cleaned up, rebuilt and fixed

It’s all done, just have to finish rebuilding front brakes . Runs great!!

Painted the heads today. Not too bad for rattle can engine paint.

Started rebuilding the rear break caliper and put a coat of paint on the heads to bring them back to black instead of grayish silver