hi all,
i agree, it would be a shame to part it out, i wish i could import it to France at a decent price.
just in case, i would interessed by the complete exhaust system.
whish you to find the best solution for this beauty
hi guys
i d like to uprgrade my oil system, can someone tell me what s the difference between morley's hd oiling cure and pcw pro oiler mod?
which the best if there's a "best" mod ?
thanks for your help
philippe
hi
for my first post i have a great question, does someone know the sizes of all the bleed valves on our vmaxes (rear , front and clutch) ?
i saw this http://www.speedbleeder.com/
what do you thonk about it ?
thanks for your help
hi guys
i have a similar problem
the run fine untill 5500 rpm and then cut ignition, since i let the rpm go under 5500 in fifth gear or another it starts again
i tried vboost deconnected same problem
if someone can help
regards
Philippe
hi Mark
i ve turned out one turn the mixture screw (3 turns)
and it seems to fix the idle problems
i ve don t seen the sticky in the carb section explaining the idle setting, could you tell me where to find it
thanks for your help
hi
my bike come back from my mechanics
he puts back the stock needles synch the carbs again
and turns out 2 turns the mixture screws
so now works well but the idle is not very stable
the tacho needle sometimes moves up to 1200rpm and then go back to set idle
and when i lightly blipped the...
Hi
i m from France
I ve recently bought a Factory Pro jet kit for my V max (ref Y11-1.1 ti), and have some difficulties to adjust it.
It s an European 2000 V max with :
Main jet : 152.5 was 150
Pilot jet 1: 90 was 95
pilot jet : 37.5 was 42.5
needle clip...