Note that there are two seals, the one already mentioned and the one that goes between the two halve of the 'pencil box' - #52 (26H-12428-00) in...
Replace it with the cross member from the later model.
You would do better to invest your hard earned on some decent springs.
1) Check the fuse for the headlamp.
2) If not OK replace fuse and see if it blows again.
3) If OK enjoy the Max and send me beer tokens to the...
Don't think you need a video.
Lift front of bike so the wheel is off the ground.
Undo the fork cap(s).
Take out the spacer.
Get a length of (say)...
Are you doing this for the looks or enhanced performance?
If it is the first then it is an expensive option and if the latter then springs and...
By altering the length of the stacks you can alter where maximun torque/ power occurs.
More reading here
Also no issues with a 17" Dymag with 180 tyre.
I have had the Exactrep tanks in mine for many years now.
It fitted my standard but braced swinging arm with no issues.
It is a tight fit getting...
By 'progressive' do you mean progressively wound springs?
These are a one-size-fits-all option; not necessarily a bad thing and many who have them...
Had the seat off and started to delve into the innards before I realised I hadn't switched off the immobiliser.
Wot a pillock! :(
That would be true only if the system is over-filled and that the cap or cover is not vented.
I think you need to get the basics right i.e. the synchronisation sorted before diving in any further.
It would seen that line pressure is building up either as you use the clutch or as the fluid heats up and expands.
This will cause the clutch to...
Not stupid, it's perfectly reasonable to ask a question for something you don't know. :)
Page 2-13 describes how to adjust the idle speed and includes a picture of the screws location.
It says 'Warm up the engine and turn the throttle...
I haven't ever read of anyone doing what you suggest so can't offer any feedback on the likely effect.
The OE system opens the V Boost...
Here you are.
Also have a read of this thread as well.
We heard you the first time.
Separate names with a comma.