New threads and interesting conversations directly in your inbox. Sign up now and get a daily summary of the latest forum activities!
I think you would be even happier if it growled like a V Max.
You can check the float level with the carbs on the bike, the Service Manual shows how.
I ran Holeshot headers and silencers and the bike ran fine...
As it is fouling that indicates that something is wrong.
Is the fouling sooty or oily?
Assuming it is sooty then you need to establish why it is...
Pick-up coils tend to either work or they don't or work when cold and fail when hot so no, that isn't your problem.
Do they come up to a similar...
That is most likely to happen as they are probably Japanese Industry Standard )JIS) heads and I suspect very few of us have such a screwdriver in...
I would start with checking that both fuses are OK.
Then, armed with a wiring diagram and multimeter, establish if you have power at the...
The part that Mr Fernandez has circled on his pic are called 'knee grips'.
They are not OE equipment and were made by quite a few enterprises. I...
All of the 'bare' alloy would have been lacquered but it is not unusual for PO to remove this once it starts to get tatty.
Whilst I stand to be...
No, you also need to have the V Boost butterflies, operating cables and servo motor.
If you can see what is shown in the photo above then the...
I'm suggesting that you cover the basics before you dive in deeper as it is ost likely these that are causing the problem. If they are OE then...
You would need some means of sending a signal to the meter that it can use to establish both parameters.
There are threads on fuel gauges (use the...
Agree with the comments above, no issue with the NGK's.
Have you checked that the fuel tank breather is clear?
How old are the plug cap and leads? Have you taken the leads out of the coil towers to...
VBoost from above
From the RH side
and the V Boost inlet bits
They are still available from Yameringha - have a look here and here
Agree with Sean, have a look here.
It was a home made jobbie Sammy. Not aware if anything similar is available.
It is aluminium with a smoked perspex face. Tha gauges are Drift.
Adding an additional rad will be fixing the symptoms not the cause.
Agree with Mr Gentsvmax that you should check that the radiator core hasn't...
Yep, I am (and a knee), had mine done twenty three years ago and no issues with riding.
Anything else you want to know?
Separate names with a comma.