Search results

I’m in need of hinges for the seat flip (gen 2), I can’t figure out any situation how these could be left without use as extra parts but if you have these, offer them to me. Or where to get them? Thanks.

I noticed a slight oil leak between valve cover and breather pipe, it seems that there is o-ring (part #43 on pic), what size o-ring is that or do I have to get Yamaha o-rings? It takes couple of weeks to get yam stuff here. Anyone?

In Gen 1 you could use final drive oil drain plug in motor too, is this possible with Gen 2 too? Those aftermarket plugs has so short threads, that I’m worried of stripping threads from engine with those. Also, it states on service manual that drain plug should be tightened to 45 Nm (33 ft lb)...

Do I need it or can I just unplug this optimiser? I have PCV + Autotune along flashed ECU, and I understand how this set works but this O2 optimiser is bit of a mystery to me (PCV installed by po) Does it affect flashed ECU in any way, or does it run richer because of this optimiser? EDIT: Well...

I’m looking handlebars that have less pullback than stock bars, I have read about Sean’s Muscle bars and he is checking if he has them anymore or not. Is there any other known good option? And how about swap, is there something special that I should prepare for? I’m aware of bar ends and that...

I installed flashed ECU and it was recommended to erase all possible error codes, but I cant get into diagnostic mode. I don't know if my bike has immobilizer or not, but it was mentioned in Gurued Gear's instructions that if it has, "disconnect the 6 position Immobilizer connector under the...

I just installed Akrapovic de-cat pipes and mufflers, and bike has air box mod (MAB) and K&N filter. Does anyone have same setup, and could send me yor map to test? Or advice to what AFR to try? I have downloaded maps from Dynojet, and they seem to have different AFR settings for european...

I was doing some maintenance to my "new-to-me" 2013 Vmax and there was Dynojet Power Commander V and Dynojet Autotune installed, I thought that bike was bone stock. What might be the purpose of these boxes, and what kind of advantage they are meant to give? I noticed that somebody have removed...

Hi, I have some issues with my bike, year 2013. When I start the bike with cold engine, with first try the motor won't crank properly, I believe it turns over but very slow and it makes weird sound compared to normal cranking sound. Kind a like battery is running low voltage. Then power off and...

Does Gen 2 have ever had original stripes? I kinda remember, that there was black version with two grey stripes on faux tank, rear fender and might be on front fender too? But I can't find anything to back up my imagination. Possible made atleast to europe. Anyone?

I have had some bouncy-like shaking for a quite a while now, it feels like up&down movement to the handlebar and isn't the usual woble everyone is talking about. I had same issue with stock springs too, now I have progressive fork springs with 1" lowering and rear is progressive too. Today I...

I was working on a max and noticed, that I have quite a bit of freeplay in vboost cable, can that be tightened up somehow?? I've noticed before, that my vboost buzzes longer on a power-up than in videos that I have seen in youtube etc. It can be heard when servo pulls just freeplay and when it...

First I had huge fever for Gen-II, but then I saw Diavel at the dealer and yeah, it definetely looks frikkin' awesome.. Anyone happen to have Diavel? It would be nice to hear how it has been. Gen-II would be better as touring bike and 2-up riding I believe, and there isn't that constant...

https://www.youtube.com/watch?v=-z4iw8Ppo1o https://www.youtube.com/watch?v=oWuyrlXI7nA

I changed my worn out metzeler 880 to michelin commander II and now bike "wobbles" around 40-45mph, it feels like its up and down movement? I can take my hands of the bars when it occurs. I think it made this sometimes with old tire too, but now it is all the time at that speed. Lower or higher...

So, if you have saddlebags, tell us what you have and how you like 'em, and please, attach a pic of 'em too! I'm looking for some bags for a weekend rides etc, two saddlebags should do it. Riding two-up with original sissy and MaxGasser, so "throw-over" type of bags should go underneath...

Some F'n jackass stole my handlebar clock, it was two piece and I still have the mount on but the clock itself is missing :bang head: It was cheap and not so great any way, fresh battery lasted way less than a year etc.. What kind of clocks are you guys running with? I'd like a black casing and...

Have anybody put progressive springs on stock rear shocks? Any good, or should I just ditch the stock ones and put on new shocks alltogether..? Front needs progressive springs, I want get rid of that dive when braking, but rear end isn't so bad I think. I dont know about better though, max is my...

So -96 max is the patient, it has ignitorbox Hitachi tid14-93 B 3jp-11, is that possible to swap with -98, Hitachi tid14-93 C 3jp-12? Whats the difference?

Coolant leak.. So, got my bike together yesterday, went for a little ride and today after work I go to look that has any oil leaked, my magneto cover leaked in last season and I have changed clutch too.. There wasn't any signs of oil leaks, but a nice big puddle of coolant on the ground!! That...