Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. MaxMidnight

    Journal diameter?

    Does anyone know the journal diameter of the main and big end bearings? This is not something I have seen published. I know how to size replacement bearings but have been asked what the original diameter is.
  2. MaxMidnight

    Translogic Powershifter.

    Has anyone fitted one of these to their Gen 1?
  3. MaxMidnight

    Oil pick-up gallery

    One of the UK V Max Chat members has been persuaded that he needs to address the Orange O ring issue. During the course of his dismantling he has noticed what looks like a restrictor in the end of one of the pipes. It isn't anything I have ever read about so would appreciate any...
  4. MaxMidnight

    How do I archive messages?

    I'm possibly missing something basic here, but I want to archive some of my messages. Could some kind person tell me how to move a message from (say) my inbox to my archive folder?
  5. MaxMidnight

    It can oly get worse as I get older

    Fitted the flying leads of my new CTEK Multi MXS 5.0 12V 'Intelligent' Battery Charger & Conditioner so that I can keep my Odyssey battery at the peak of perfection! It is, however, a shame that the 'intelligence' didn't extend that the moron who attempted to fit it. First time I tried to use...
  6. MaxMidnight

    What colour is it?

    If there was a 'Should get out more' section this would be posted there. :rofl_200: The PDF in this link lists the colours of bodywork, frame and wheels of the Gen 1 Max. I would appreciate any feed back regarding errors, any additional information you may have or offers of vast sums of...
  7. MaxMidnight

    Some things you can't hurry...

    I bought a belly pan early 2011 and finally got around to start modifying it over winter. Now all done and fitted - added extension pieces to the rear of it, modified the cut-outs to fit around the crash bars, made a couple of small air intakes on the side and a shroud to fit over the side stand...
  8. MaxMidnight

    Prat of the week?

    When I laid up the bike last winter I promised myself that I would get all of the planned jobs out of the way before the riding season began. I almost suceeded although the modifications to the belly pan took longer than anticipated...plus I had a metal plate removed from my leg....followed by...
  9. MaxMidnight

    Pre-load top nuts

    In the late eighties, early nineties the Japanese factories realised that customers wanted some adjustment on the front forks. I seem to recall that there were machines with pre-load adjusters built into the top nut of the front forks. Is anyone aware if there are any out there that are the...
  10. MaxMidnight

    Lying inder my bike...

    ...as you do, I noticed these two treaded holes Anyone know hat they are for?
  11. MaxMidnight

    Some Xmas present suggestions

    Now I don't know how good you would have had to have been to get Santa to bring you one of these, but I suspect even a saint would be hard pressed.
  12. MaxMidnight

    Re COP's & RX2n

    Before fitting a set of Gannon's excellent looms the rev counter on my RX2n behaved as all good rev counters should. It receives its signal from the original (Grey) tacho feed wire. Since fitting the COP's it will double read intermittently, sometimes just a quick 'blip', other times for quite...
  13. MaxMidnight

    So you want a new train set?

    Feast yer peepers on this one!
  14. MaxMidnight

    Ohm is where the 'art is.

    I'm fitting a 5 volt LED for the fuel warning lamp which reqires a resistor to work with 12 volts. This has been fitted in series with the LED. My question is do I also need to fit an additional resistor to 'mimic' the original bulb and if so, in series or parallel to the LED? :ummm: TIA
  15. MaxMidnight

    DJ7011 breather restrictor

    Ignorance is bliss.... I run Mikuni Flat-slides with the Stage 7 breather set-up. The motor has run well and I was happy. However... I have recently read about the restrictor (DJ7011) that goes into the original breather pipe. My questions: 1) What is the purpose of it (yes, I know it...
Back
Top