Search results

I'll run through my (free to a good home) bin's when I get back home and let you know what ive got. Clutch hose not cable right?

Looks like an early speed triple front fork in a custom billet tree.

those are the measurements for the offerings on ebay. 36/36.5/37/37.25/37.5/38. i have no idea if they are even close to reality. it seemed a bit broad to me too. rod journals are 3/2 and rods measure out as no.6 stock rods. no color code on old bearings ( motor has been apart ) but they...

blue, 38.0mm/ 1.49606" black 37.5mm/1.47637" brown 37.25mm/1.46653" green 37.00mm/ 1.45669" yellow 36.5mm/ 1.43700" pink 36.0mm/ 1.41732" any confirmation on any of these ?

Im getting ready to order some engine parts tomorrow and i'm trying to figure out rod bearing sizes. I cant find any measurements for the rod bearings. I understand yamahas way of doing it but i'm using aftermarket rods and i would like to get it right the first time. My best option so far is...

Thats just the hub! The wheel was 167"x72" Far better tire selection than that 17" stuff everybody else uses. Gearing is a bit tricky.

I don't know about "right" but i'm doing it. Its either going to go, blow or put a hole in the fence.

Nothing else to do.

wheel is almost ready for weld up. Next up.. Get some parts ordered and build a motor.

gap?

This is the answer i came up with for what i think is clear coated aluminum like triple trees. its a mix of chrome and silver powder 75/25. Its as close as i can get but at least all of it will be the same color. I'm still working on the headlight/turnsignal thing. Im having trouble getting the...

they are not really heavy compared to a 2021 africa twin or an xlv 750 tipping the scales at around 490, a ktm 1290 about the same. heavy compared to my xr at just 320 but a totally different type of riding. big bore adv. bikes like the ktm1290 or the africa twin are actually quite agile off...

dunno. got the same post on a powdercoating thread? On the craftsmen note, I stopped buying craftsmen years ago for several reasons. The biggest was the stores closed around me, The second was hand tool quality dropped significantly. virtually all craftsman "hand tools" were made in china and...

apparently in russia the vehicle of choice for a traveling band is.............

prismatic powders. i got some ultra and some regular black chrome. i was going to do some reg. tomorrow for my bike and a battery box cover for a friends sportster drag bike thing. im kindof shopping around for powder to see if there is a difference.so far it seems to be pretty much the same as...

i'm doing black chrome on tuesday. I'll put up some pictures of a set done.

i actually thought it was a photoshop contest. the red one is from a pre 2005 post about a future project that actually referenced allen millyard and the shopped cbx-8 was a teaser to his project. Not sure if he ever finished it or even started it. I would assume the latter since i haven't...

I see your 8 and raise you 4

found a bottom, still looking for a lid.

not sure what year they changed to floating rotors. I have non floating some from an 85'