Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. vmax1125

    Wire routing 411?

    I think i got everything where it belongs once i got the harness layed out right things only seem to go one place. i did notice that the rear brake switch and one of the switches probably the starter safety switch the wires are not the same color from one side of the bullet connector to the...
  2. vmax1125

    Wire routing 411?

    I am good with that part but that was a good pic i have the wire in front of the battery they need to go behind. i have a few wires i have to figure out yet one or two black wires with eyelets which i guess are grounds and some wide single blade connectors one fron the battery to the starter...
  3. vmax1125

    Wire routing 411?

    I need a little help i am putting my cousins 06' back together after replacing the bent frame and i got to around the rear coil area where all the wires meet and don't know exactly where they run they just seem to be in the wrong place to me. plus there are some single wires with bullet type...
  4. vmax1125

    Gary MCcoy ???

    Thanks guys i some how figured that was the case i wll check out ayers to see what i can find. hope Gary is doing ok he's a great guy! Chris
  5. vmax1125

    Gary MCcoy ???

    Does anyone know if Gary MCcoy is still at Mondak motorsports i need some parts and sent a few emails to him which would not go though and mondak's have never replied to theirs. do i need a new parts guy? Chris :ummm:
  6. vmax1125

    New Akrapovic Slip-On for VMX17

    it sad that the set up cost $2000+ out of reach for most people and why you can get a x pipe and find a custom set of cans for way less. the x pipe on mine with stock cans sounds good not loud but decent and i talked in detail with Mike the guy that makes the x pipe about recoring the stock cans...
  7. vmax1125

    fuel tank ?

    i have the old tank but its been bent up a bit from the accident sad its an 06' 2k miles. i just got out bid on ebay for one in decent shape sold for $8. Chris :ranting:
  8. vmax1125

    fuel tank ?

    does anyone happen to have a good fuel tank they want to sell for a reasonable price. everyone i come across is rusty inside i really dont want to get into sealing the inside if i dont have to. Chris
  9. vmax1125

    2009 VMax Parts

    the wheels are pm's they were on the palhegyi custom 09' i think i emailed pm about the wheels when i saw the max but they did not know anything about them probably one offs they are sweet!!! Chris Custom PM Front Wheel
  10. vmax1125

    UFO Vmax Turn Signals

    i have oberon leds on my gen1 they are very bright but i did not hook up the front running lights now my gen2 i used leds front and back with running up front its only a $2 resistor that goes in line to make them work. the flasher needed changed for the leds also just plug and play custom...
  11. vmax1125

    2009 VMax Parts

    here is a link to yamaha with some of the parts they just released the wheels are not yamaha's they i believe were customs from performace machine. Chris http://www.starmotorcycles.com/star/accessories/acscitemdetail/5/23/111/460/all/1/9047/0/detail.aspx
  12. vmax1125

    St. martin max

    looks like there was a shortage of car wash down there but we were on the french side!!!:fart: Chris
  13. vmax1125

    St. martin max

    just when on a cruise down the bahamas and virgin islands and came across this max parked in st. martin on the french side so i popped a few pics. you never know where you will find a vmax !!! Chris
  14. vmax1125

    Solid motor mounts

    contact Gary Mccoy at mondak motorsports he will give you a good deal on solid aluminum mounts he is in the vendor links. i dont feel any big difference in vibrations but they make the max feel firm no flexing. Chris
  15. vmax1125

    Got my carbs back from Sean, need advice

    as to your question about the carbs being seated they dont look like it they pop out hard and in the same. loosen all 4 clamps and put all you weight on them you may have to rock on them to get them down. you should not see any ribs on the carb outlet. Chris
  16. vmax1125

    Yamaha hybrid bike for 2010

    looks like the judge dredd bikes i am sure sly will get one! Chris
  17. vmax1125

    '09 B-King vs '09 Vmax

    i dont want to get into a pissing match but the b king is a naked sport bike look at the seat pos. ,the tank in your nads, stance, chain drive, exhaust ,ect. just like the yamaha fz's. not a cruiser thats for sure. Chris
  18. vmax1125

    '09 B-King vs '09 Vmax

    the stock tire on the 09' can not put all that power on the ground i can blow the tire loose in 3rd at 50mph. change the tire and those #'s will get flipped but it still comparing apples to oranges its a hp cruiser just like the gen 1. Chris
  19. vmax1125

    Age of Vmax owners

    38 here been riding bikes since i was 10 and 15 on for the street had too many bikes to list i used to change them faster than underwear! Chris
  20. vmax1125

    Award Request for Buster Hymen!

    Got my vote! Chris :th_peace:
Back
Top