Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. G

    Fuel light won't shut off?

    Thats not a resistor in the LED buld its a diode !
  2. G

    Can't get motor to idle

    You need to yank them off and clean the pilot jets unfortunatly, just had to do the same
  3. G

    how can I clean the pilot jet without removing the carbs

    how can I clean the pilot jet without removing the carbs, will the shotgun or pea shooter do it?
  4. G

    carb intake boots, anyone?

    Hey guys , I believe I need to change the 4 carb intake boots on my '88, they're still original, while I can't seem to find any vacuum leaks on them with the spray test , the bike seems to act like it has a small one, I have noticed some seapage around them , particularly near the carb bases. My...
  5. G

    Carb Intake Boots

    Hey guys , I believe I need to change the 4 carb intake boots on my '88, they're still original, while I can't seem to find any vacuum leaks on them with the spray test , the bike seems to act like it has a small one, I have noticed some seapage around them , particularly near the carb bases. My...
  6. G

    Carb Intake Boots

    Done
  7. G

    Carb Intake Boots

    I would love them, how much do you want for them? PM me please
  8. G

    Carb Intake Boots

    That would be awsome, thanks let me know.
  9. G

    Carb Intake Boots

    Hey guys , I believe I need to change the 4 carb intake boots on my '88, they're still original, while I can't seem to find any vacuum leaks on them with the spray test , the bike seems to act like it has a small one, I have noticed some seapage around them , particularly near the carb bases. My...
  10. G

    Carb intake boots

    Great how much?
  11. G

    Carb intake boots

    Ok guys who may have the best price on new carb and vboost intake boots? Tried ron ayres, but i think theyre a bit pricey
  12. G

    Miss fire / popping at idle

    Checked for air leaks , looks good, all seated and tight, a/f screws are at 3.0 turns and yes af scews were removed and cleaned and in right order, oring / washer / spring / screw , i have tried to richen 1/2 turn , and lean 1/2 turn not much difference -- seems like almost a ignition miss? Any...
  13. G

    Miss fire / popping at idle

    So i just took off my carbs last night and cleaner them, everything looked good and is now spot on, after re assembling the bike, i re synced the carbs and now when the bike idles it seems to miss fire at idle, more than usual, she seems to ride ok, but its a distinct pop and miss fire at idle...
  14. G

    Surging

    Thanks i guess a breakdown is in order
  15. G

    Surging

    The idle does not surge, its a bit loppeyer than normal it may be missing, i tried the propane trick, and found no air leaks at all, as for sync its spot on, synced it at 1500 rpms, the acceleration in the low to mid is a bit sluggish, but once it hits about 4000 rpms she pulls good
  16. G

    Surging

    I did not recently get new gas, surging to me is if held steady at 2500 rpm it wants to go more, but just surges, there is no backfiring involved, and the 1100 idle has a bit of a miss too thanks
  17. G

    Surging

    No one has any other advice?
  18. G

    Surging

    I have recently started using startron enzym to treat my fuel, seems to make no difference, any other suggestions guys?
  19. G

    Surging

    My 88 max all the sudden started surging between 2000 and 3200 rpms, when cruising, can this be a clogged pilot? I tried the shot gun with no difference, changed the plugs also, is there a way to clean the pilot jets without breaking down the carbs? Also tried alot of seafoam, no difference !
  20. G

    Headlamp

    H4 or 9003 will replace the stock light, however don't exceed 55 / 60 watts you may melt the harness !
Back
Top