Search results

Poker Face by Lady Gaga ?

In addition to all of the above, the greatest improvement made was to the sound output. This combination is not legal for street use and comes also with removable noise dampers. Is this supposed to say not legal ?

Thanks guys for the suggestions, i could not see any errors in assembly, considering they go together pretty simply, so i bent the tab up and cut one ring off the spring under the screw and now i am fully synced up with a fair bit of movement in either direction.

Hi everyone just wondering if anyone knows why i cant seem to get my left and right sides synced together. I had them synced fine but then ran out of gas and sucked some junk into my carbs so i had to take em off and clean them again, other than cleaning the only change i made was moving my...

Coupon code "vmax" is not valid. The coupon expired on 6/1/2009

I am guessing the discount has ended on these ?

I tried this and they turned but were equally hard all the way around. There were not any points that were easier or harder. Also right below the top clamp there is a valve for adding air pressure, i am assuming under it must be a hole in the tube to let the air in, how are people moving the...

Thanks guys i will give that a try.

Hi, i have a question regarding the front fork. If i sit on the bike and line up the top of the triple tree and the handlebars so they are exactly perpendicular to the bike the front tire is aimed slightly to the left. Is this something i can straighten by loosening all the bolts that hold the...

From what i have read on here it looks like about 40 at the crank. On a stock motor.

Re: Phat tire question Some people have to washer some don't. I have close to half an inch of clearance on the swing arm still with a metzeller 170.

I just bought this light and the bullet connectors were a smaller size than the stock ones on my bike. i just cut and used the stock wiring to extend them anyway. I have to say though compared to the light i made for the grab bar area the motorcycle mods one is very dim . I wired the brake on...

Sweet i did notice some throttle lag, i figured it was to do with the carbs though. Cant wait to get it all back together now !

That's awesome thanks, mine had a cap on that one as well. I assume when I go to sync them that I need to undo that hose again.

I have all that off because I have the carbs out right now, do you know if there is a picture of it in the servce manual perhaps

Thanks for the info, I think I must be blind though I can not see a nipple anywhere on that manifold. Is it on the part of the manifold that has the vboost butterflys?

Hi i just pulled my carbs so i could clean them and remove the front two coils for my cops and i noticed there is a little module called the boost sensor by the icu. There is a hose from this unit and i dont know where it plugs in, can anyone let me know thanks.

I think you mean 120, and it is only a small percentage.

It seems from what i have read each tire and each bike differ, some 170 tires fit fine on some bikes without moving the washer.

Thanks for the picture, and i will check out the other links.