Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    2 pin connector

    Where can i get the 2 pin connector for the COP mod. Got them off a gxsr 1000 would like to buy the right connectors. Thanks in advance!!!
  2. D

    Gas out of the jet needle?

    hey thanks, I will give it a try tommorow and let you know what happens!
  3. D

    Gas out of the jet needle?

    Does this mean I get to take off the carbs? I am a vmax carb virgin!
  4. D

    Gas out of the jet needle?

    I paid a mechanic to sync the carbs, 2.5 turns out, vent tube not plugged
  5. D

    Gas out of the jet needle?

    yes at idle, what does that mean?
  6. D

    Gas out of the jet needle?

    Had wet plug, I think I know why. Had air filters off, started bike noticed gas running out of where jet needle seats. What causes that? How do I fix it? Thanks in advance!
  7. D

    wet plug!!!

    Checked the things you mentioned seemed to all be ok. Took off both air filters from that side of bike, the cylinder i am having problems with the carb has gas running from where the jet needle seats that is the problem correct? What do I do now. Thanks. Another question with the air filters...
  8. D

    wet plug!!!

    Thanks I give these things a try!
  9. D

    wet plug!!!

    Okay sitting on the bike the back cylinder on the right side keeps fouling out by being wet, checked all the plugs other 3 are dry but black. I seem to have good spark on the cylinder that has the wet plug is it the carb or is it something else? I know I have come to the right place for help...
  10. D

    Performed the shotgun...Started bike...

    Tapped carb got the float unstuck. Seems to run better, But not the best. Any other pointers I can do myself would be greatly appreciated! Thanks for all your help!
  11. D

    Performed the shotgun...Started bike...

    Performed the shotgun, started bike and on one of the carbs was pushing gas out of the main jet air bleed, did I do it not well enough on that carb or is there something else I should do next? Thanks!
  12. D

    Carb Problem! I think?

    Any help would be awesome! From 1,000 to 3,000 rpm just tooling around town it feels like my max is missing and loading up. Put seafoam in it today hope this helps. Any help would be greatly appreciated!
  13. D

    Charging Problems???

    I am having some sort of charging problems. Had stator and rectifier replaced by mechanic now charges at 13.6 at idle but when I rev it up to 5,000 rpm and check it with voltmeter it drops to 12 or below. When I take it for short rides it runs ok at first but it then runs worse and worse while...
Back
Top