Search results

Not the place to really ask the question but I have more confidence ppl in here rather than a bunch of kids on an ATV forum that will tell me to check the jetting...lol Ok so I bought a 2008 trx450er that I couldnt test as I normally would being it was an apartment complex, I get home and kick...

Hey guys about to buy the otec set of clear covers from exactrep but had a a few questions. Looking at the all alum, or the bi color to be honest. does the black/bi color match the gun metal paint used on the bike? And two the all aluminum, any one clear coat these being aluminum absorbs a bit...

So ordering my trex stand today and bought spools the ither day cause a tire change is coming up real soon. These spools are held in by a 6mm bolt. I am sure it is fine but that still blows my mind. Has anyone had these break off?

Wanting to see if any of you guys have a sound bar style speaker on your vmax. something loud and clear..

Sure they sell cheap on ebay but why not. next thinking of proto’ing a cowl and scoop underlight.

Just seeing if the guy i saw today around 1 with a red vmax is part of this forum. He was stopped taking a break at a store near fm3083 and fm 1485.

Title says it all. I know to get full potential out of your bike a flash is a must but how detrimental is it if you wait a bit after putting mid pipe and slips. I ask because to make a long story short this whole virus thing has my income questionable and looking at a rather large pay reduction...

So I have looked for this till my eyes are bleeding.. The 2012 I just bought w 1200 miles on it was dropped at some point by previous owner, scratches dents on exhaust heat shield is whats an eye sore since the fuax air intake is pretty superficial. This shields look removable from headers but...

Well after selling my 01 vmax back in 2015 I took a long break from being on here. Going tomorrow to pick up a 2012 vmax with 1200 miles on it totally stock and looks show room...I don't like stock so I'll be picking brains once again..any suggestions on what to hit first. I assume the ref lash...

Guys I bought extra bulbs 12v 23/8w Because they don't last that long. Anyways this last bulb I changed out, isn't burnt but blink fast.. I took the one from L side and put it on the R socket to see if it blinked fast but it didn't. I've tried different bulbs aswell but its like the ones I...

I have been having a pretty good lag when wot from 2 or 3, like when getting on it to catch someone on the street, and has been running pretty shitty in the 3-4k range at cruise. I did the shotgun fix the other day but didn't help much. Today I took off the plug and all of them looked fine but...

Well I just recently noticed that the gas cap I have isn't the stock one that came on Vmaxes. I guess when previous owner bought the corbin seat they modified it with a rubber 2" reducer down to a 1 1/2" that accepted a Perko filler neck, I guess so it was higher in the seat. I never noticed it...

Going to see if there is a conversion out there that I haven't seen yet, the cheapest inverted fork conversion kit I've seen so far is from cycleoneoff.com for around $1300. So anyone find a cheaper one?

I bought pcw's stiff clutch spring took out the barnett clutches and put back in my old eom clutches, and now I'm getting 4th and 5th gear slip. So barnetts suck so I'm between the OEM's and EBC's clutches, which are better, they look like they are possibly made from same material. so which is...

I'mn about to undertake the rebuild of my vmax forks. I was wondering what is uaually purchased to do so, I know I need fork seals and dust seals, buying progressive springs aswell. Do i need BUSHINGS or is that something to look at and inspect after disassembled?

Put new clutches in about 4 months ago and went with the barnett clutchesinstead of OEM , and they seemed to slip in 4th and 5th pretty bad under hard loads. Took them all out and skuffed up all the plates and that solved the problem. But I was going to go ahead and do something about the actual...

Here a few pics and items purchased to do this project plus a 1st grader schmatic...lol LEDS: (18) 25mA, 3.3v, white 7000mcd, 30 deg resistors: (6) 100 ohm, 1/2 watt, 5%tolerance( brn, blk, brn,gld,band circuit board: (2) 1.5" x1.5" red reflectors: 4x1" rectangular (from Grainger) for anyone...

I made two small circuits today each having 3 leds on them, white 3.5 volt, 5mm , with two 150 ohm 1/2 watt resistors. anyways made them but don't like what the look like through the scoops, it looks like bulbs behind the wire mesh, I'm shooting for glow. so my question is what will let...

This happened few months back when I had purchased some bulbs from autozone, I was going for size all I know is they fit and they were 12v. When I installed them they blinked fast as if one was out. I do have aftermarket blinkers, like the ones UFO sells, the bulbs are smaller than OEM. The only...

Want louder marks exhuast, this is what I did to my 4 to 2. The resonator tube inside the cans can be taken out with a little man handling along with the fiberglass. Go to autozone or Orielly's and pickup two 14" long exhuast tubes, if I remember right they were 3.5 o.d.. Anyways dremel the...