Search results

My bike is starting to leak coolant from the elbow where it goes into the water pump, any special trick to no damaging the elbow? Should I rebuild the water pump while I'm at it? Sent from my HTC6525LVW using Tapatalk

What are some of you guys using for phone mounts? I have a HTC one and would like to be able to use my GPS while riding, thanks! Sent from my HTC6525LVW using Tapatalk

Got my bike running last week after the usual yearly carb cleaning and my attempt to seal up my annoying little coolant weep, left the plugs alone and figured I'd change them later. Bike ran like shit, felt like it lost 20hp so figured I'd check easy stuff first like the plugs... I'd say that...

Anybody ever have a weeping coolant leak from where the coolant hose attaches to the front head? I'm getting ready to drop my engine down for better access to it but I had a small leak from that area all last year, replaced the hose, replaced the clamp, went to a worm clamp and still leaking :(...

Shipped my parts for the used 1500 I bought from Kyle to PCW today, sent some extra stuff in for cores to to help out my bill. The crank was ate up from where the bearing spun but its repairable but I just sent a good used crank that I'm going to use. Got to have #2 rod resized for sure but...

Well finally finished tearing down the used 1500 engine I bought, bores are a little scratched but acceptable, thrust looks decent as far as I can tell, crank is grooved up pretty good (#2 spun a bearing) but I expected that, rod that spun still looks great but I'm having them all checked but...

Is this just a big motorcycle rally or do they have a local race track and drag race for the event too? Going to really try to get the time off of work this year to go but if there is drag racing I'll just trailer my bike but if not I'll ride down. Just don't want to break a driveshaft or...

I see epic burnouts next year!! lol http://www.youtube.com/watch?v=IW9Yaa-3oUc&feature=youtube_gdata_player sent from my HTC Rezound using tapatalk

Check out the comments, some are really good! lol http://www.guns.com/2013/10/28/peta-launches-air-angel-drone-meant-hunt-hunters-video/?utm_source=rss&utm_medium=rss&utm_campaign=peta-launches-air-angel-drone-meant-hunt-hunters-video sent from my HTC Rezound using tapatalk

Well I'm probably done racing for this year but I went yesterday, first pass I left soft (I was practicing for the nitrous launches) and went an 11.34 at 120.7mph and that's over 1 full mph better than my best previously. Then I had my friend Kevin take a motor pass and he went 11.03 at...

I couldn't find anything in a search, how do you guys degree the cams (with a degree wheel) with slotted sprockets? Gonna be doing one eventually and just wanted to get the process down. Thanks! Sent from my ADR6425LVW using Tapatalk 2

Sent from my ADR6425LVW using Tapatalk 2

Well I've got the bike loaded up and ready, gonna try out my progressive nitrous controller tonight and see what I can do. I'll post the results later tonight or tomorrow and tell you guys how I did :) Sent from my ADR6425LVW using Tapatalk 2

Anyone ever have the outlet on top of the cylinder head leak on them? I thought it was the hose (it needed replaced anyway) so I ordered a brand new one with new clamps and it still just barely weeps from there, I even put a worm clamp on it and still the same.. I'm guessing its leaking where...

It was time to finish off the Shinko, had fun doing it too! http://www.youtube.com/watch?v=3ap9524O5K0&feature=youtube_gdata_player Sent from my ADR6425LVW using Tapatalk 2

Well I've had an annoying coolant leak all season, been weeping out of the drain off hole under the spark plug on cylinder #2 (front left while sitting on the bike) so I determined it was coming from the coolant hose where it attaches to the head. Trimmed about an inch off the hose to get to...

Just knocked down my first longer range ride (about 200 miles) yesterday with my new Morley reshaped seat and what a difference!! I did the full cut on mine and I'm a big guy, I weigh about 300 now but usually about 270 but because of the flat profile it's super comfortable... I went with the...

Can believe his skinny ass keeps that beast down on a stock wheelbase!! http://www.youtube.com/watch?feature=player_embedded&v=jPV3uvoLkgI

First things first, gotta thank Ost85vmax for sending me this switch setup... I really appreciate it bud!!:clapping: The first thing I did was to get the sensors figured out and I gotta also thank NHVmaxpower for his review and install because it saved me some time because he gave the tip about...

Anyone have any 4"x6" car speakers for cheap or free? Need some for the dash of my s10 and figured I'd see if anyone had anything here before I bought some new... Thanks everyone Sent from my ADR6425LVW using Tapatalk 2