Search results

I have the UFO 4-2 system, and it was too loud for me. I bought some mufflers from Sean Morley that work great, now it sounds fantastic. I had to heat and bend the short connector tubes slightly, not much really, for them to fit. I'd recommend that you contact Sean.

In case anyone was curious, it was the starter relay that was causing all of my troubles. After the parts were delivered, I first replaced the starter relay and rechecked all of the wires/switches/ignition and it all checked out fine. So, I started with a few short rides, and had no problems...

Thanks guys. After checking the starter relay, it is bad, but I also checked the starter relay cutoff, and it is bad also. So, I'm going to check out Bike Bandit and see what the damage will be to replace them. Thank you all for all of your help. Electrical problems are not my forte, and I...

Thanks guys. I just finished taking apart the ignition tumblers. I cleaned all that I could, and checked the wires, it appeared to be okay. I'll check the starter relay and that blue/white wire next. Thanks again, and I'll let you all know what I find.

I did disengage them, and the connector looked okay. And when I checked, there was still connectivity between the red and brown wires even when they were removed from the connector.

I'm sorry, I'm not understanding the question. The bike is off, I'm checking the short at the loom between the red and brown wires, while it is disconnected from the ignition.

I only lost connectivity when I removed the main fuse.

I'll give that a shot. Thanks.

I took the wires out of the connector, which looked in good shape, and still had connectivity between the red and brown wires. Maybe a short? And if it is a short in the wiring harness, I really, really don't want to pull the loom apart. Where do these wires terminate? Can I just try and run...

Start button is not stuck, and the headlight is on.

Firstly, hello all, it's been a long while since I've posted anything on the forum. I've done just about all of the upgrades on the forum to the Max and have been enjoying it for the past 4 years without many problems. Now for my problem... I was riding home from work the other night...

I think I'll pass on that. :rofl_200:

Merry Christmas and Happy Holidays to everyone!

I use an old piece of 2" wide plastic and keep one edge sharp. I'm always worried that if I use a steel blade on aluminum I will make a deep gouge.

And it's also a great song. http://www.youtube.com/watch?v=ClQcUyhoxTg

Sorry guys, didn't mean for anyone to stab themselves in their eyes with knitting needles. LOL

Gives that shirt a whole new meaning...

I've seen one 2nd gen and two 1st gens here in Sacramento. Both times I saw the 1st gens I was with friends from work getting lunch and saw them in a parking lot. If I was alone I would've looked around for the owners. I know they're out there...

The price is what is making me stumble, at least for now. I went with a friend over a year ago to a local Ducati dealership when Motus was travelling around the country and the two prototypes looked and sounded fantastic. There's a dealership close to where my brother lives, after they start...

Not sure how many of my fellow Vmaxers are watching this new brand of motorcycle, but they are supposed to start selling soon. I'm seriously contemplating buying one, though if I do I'd have to sell my Vmax. http://motusmotorcycles.com/