Search results

Looking for any opinions or experience. I am looking to buy a Gen 2. Discounted in price due to some crate damage on the exhaust. I am looking at marks slip on mufflers and looking for feedback on the sound. I currently have a gen 1 with a jerker completion baffle and while I think it sounds...

I know all this info is out there but... Can anyone help me with the recommended plug and gap when using cops with no resistors on an 85 electrical setup. Thanks.

Anyone going to the Tomahawk fall ride in Wisconsin in a couple weeks?

Not sure what to think of this but.... Let me know your thoughts. Was leaving a local place and walking out the door a guy is taking pics of my bike. Cool. But he asks me what's the price. I bought this bike simply because I have always loved them and I finally found the one. Planned on...

Can someone verify this for me. I have an 85 that I am looking to replace my gauge cluster, speedo/tach ect. I can go with anything from years 85 to 89 correct?

So my question has to do with what the bike is looking for to achieve more low end torque. From the stock bike you can add stage seven and that tends to give you more top end power, you can go to morleys setup and get more even power throughout. Now what is it that makes more low end torque? Are...

Is anyone attending the anniversary party in Lacrosse WI on the weekend of June 21st? Yes I know they are more related to twins but just asking. http://www.sscycle.com/feature/featureview.php?s_id=66

Had to post this one. I think someday he will enjoy riding it as well. A little advertising for Sean also.

So I am lost. Hope someone has some ideas. Here is what I have done and what is going on. Started about a year ago when the fuel pump was clicking every single time I turn it on. Never ever will it stop as it should. I tore the pump apart and found the diaphram out of place. I replaced it and...

So I feel like my bike runs hot. The coolant is a year or two old and I am going to change that but I have two other questions. 1. Is there a good system flush and if so has anyone had luck or is it a waste? 2. I know on boat motors the impeller will slowly go bad and pump less water. Would...

So I have read up everything on this fuel pump issue. I have taken the pump off the first time to find the infamous diaphram had came out of its little cavity. I replaced it and reinstalled the pump. Seemed like it did help for a couple of cycles of the ingnition. It actually built pressure and...

So while out riding a couple bikes decided the long back roads where a good time for some hooliganism as some of you describe it. Well while is was getting on it I probably pushed the revs to 10k. Not something I like to ever do. The bike has a 2000 motor with 15000 on it. I have no signs of any...

So I have a question that hopefully can benefit myself and others. I would assume that everyone doing maintenence on there bike does always torque every bolt as spec'd and possibly more often torques to what they feel is correct? Maybe I am wrong but I have done quite a bit and am going to buy a...

I just recieved a great looking adapter to run the larger rotor on my back wheel with the stock caliper. The kit came with the adapter plate, two spacers/bushings, and two stainless bolts. My question is how does this install. I am hopeing that someone has a picture on one installed that I can...

Last year I rebuilt and powdered my masters. I reinstalled them and had a hell of a time to bleed out my clutch. After figuring that I had to bleed the master first and then the line I had better results but either way I dont know if this was the answer or was it just the hours spent bleeding...

Anyone have any input as to options to get rid of or relocate the speedo cable when going to the Tokico calipers? I have a stock speedo currently and without going to something digital/electronic I am not if I have any option to clean that up a bit. Thanks!

Anyone ever have a problem with the fork brace pushing the forks apart to much. I feel like my fork brace is spreading the forks and therfor not allowing the proper movement. When I get on the bike there is zero sag or movement in the front forks. Not sure if there is a front or back to the...

So I see, for an 85, they had a dyna ignition at one time and now the other one here I see. Is it TCI or something like that. What I am curious is there anything that can just give me an rpm limiter and that's it. Just curious if there is a cheaper option just to use as a safety precaution until...

Found some R1 rotors fully chromed and am looking for opinions in performance. Going to use them with a busa setup but wondering what people think about loosing friction with the rotors being chromed. Also how do you think the chrome will hold up and what type of pads would you recommend? Thanks.

So when I bought my bike it had racetech fork internals lowered 2" I believe. Now I am looking to raise them back up at least an inch since I am 6'4. Any simple way of doing this besides buying the proper spring kit ect?