Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. mattmullins

    are all vmax cylinders universal

    Just wanting to know if all cylinders are universal with different years, have a 93 on the ground was wanting to put the 93 topend on a 90 someone said that you couldn't just wondering
  2. mattmullins

    so i put on dyna mini coils- re-gap?

    Have the dyna 3000 so i added the dyna dc3-2 coils nice big blue spark, so i took one of the plug wires and put a spark plug in it so i could see the spark held it close to the frame and was jumping around 1/2" that's a pretty good jump . So i figured more gap on the plug stock is 35 thousands...
  3. mattmullins

    anyone ever use the dyna coils

    Just wondern if if anybody ever use them with the dyna 3000 and how do you like it if you did
  4. mattmullins

    spark plugs wet with gas

    Pulled the plugs out looks good after sitting for a day the plugs are wet with gas. Bike runs great great rebuilt last year the only thing i didn't replace is the emulshon tubes don't know if i spelt that right , would that cause that my floats are right . Anyone know what they cost.
  5. mattmullins

    i put ufo's on my dale walkers 4-2

    So I bought so ufo mega phone's and put on my dale walkers, the walkers was 1 3/4 id they was fine not loud when riding but when I let somone ride it so I could here them going down the road souded great different than when in was riding it , and with 150 mains in allways seem to be running a...
  6. mattmullins

    any one use the e3 spark plugs

    Just wondering if any one has used them and how you liked them and what's the part number.
  7. mattmullins

    does any body make a custom shifter

    Looking for one to change to down shifting instead of up shifting.
  8. mattmullins

    1993 swing arm questions

    Will a 1993 swing arm fit a 1990 anyone know for sure
  9. mattmullins

    cam grinding anyone done this

    Wanting to increase my torque so for $300 think I'm going to get so cam grinding done any one done this how did this work out or if you have some stage 1 cams you want to sell let me know
  10. mattmullins

    going to cederfalls ia raceway tomorrow want to go

    Last test and tune for the year if your close by come out will be some fun last run ran 119.33 mph best and time was 11.3 seconds first time at track did some adjustments going to try and beat that time
  11. mattmullins

    dyna 3000 info

    Went to tri state raceway today with friends had a blast first time at the track. I have the dyna 3000 on setting 4,10000 rpms ran 116's-117mph made 10 passes till I felt I wouldn't do much better then switched it to stock settings and then every pass was high 118's-119.33mph my best et was 11.3...
  12. mattmullins

    do you want to raise your max against others race here

    This sunday in earlville iowa at tri state raceway a small group of the max riders are going to go head to head so if you're close by n you want to race please come on out were looking for challenges
  13. mattmullins

    post your stage 7 or morely jets your using

    Trying to get my stuff dialed in the rest of the way had a rich issue now a lean issue, so let me know what your running sea level above sea mains pipes stock or 177.5 paj2 maines and so on thanks man.
  14. mattmullins

    found out why i was running so rich

    Have the morey muscle kit dales 4-2 pipes didn't matter what jet it was always 11-12 % on air fuel mix so put in the 177.5 put in the 165 dj mains runing richer, so started looking at the float level thats fine in the carbs while running gas comin out the needle so replaced oring on the needle...
  15. mattmullins

    any one use the pro street carbs

    Sorry Top fuel carbs, What I'm talking about are the ones that have the gears in the middle so you don't have to sync, if you have used them let me know how you like them I'm thinking about buying some
  16. mattmullins

    how lean of a main jet can u go

    Have morelys muscle kit air lid dale walkers 4-2 dyna 3000 setting #4 #150 main jet a/f 2 1/2 turns 1000 ft above sea level and still rich running around 12% a/f I have 145 and 147.5should I use 145 . Was at 152.5 mains changed then dyno with 150 didn't change much
  17. mattmullins

    carb synch problems

    Ok put in the morely kit went to synch the carbs, Carb 3 and 4 went to adjust and the idle changed but the Gage does Nothing, switched hoses around same thing
  18. mattmullins

    bought the morely jet kit?

    Wondering how to install this thing the hose t fitting any pics on yours
  19. mattmullins

    my max is getting bad bad bad bad

    Bought this year was bone stock, couldn't have that . First dyno was 103 HP put on supertrapps rebuilt carbs with new diaphragms 2nd dyno 105hp put on 170 shinko rear UFO drag bars plug wires with strobe caps DD clutch soldered all wires put Dale walker holeshots 4-1 DJ stage one kit 170 main...
  20. mattmullins

    dj stage one success

    1000 feet above sea level 170 main jet needle 2nd from the top a/f 2 1/2 turns out floats 1.125" took scoops off air box one k&n filter Dale walker 4-1 hole shots, so after many hours of trying to make the stage one work the hole shots seem to do it, I don't mean it runs good it runs like I new...
Back
Top