Search results

Looking for a luggage rack, I am going to powder coat it so surface condition isn't that critical.

Looking for this gear out of a v-boost unit. If you have one that is dead or a different gear is stripped I would be interested in the gear or whole unit to repair mine. It would be the larger gear that has a yellow to it and other pic shows it laying on its side, thanks

Ok, all you guys that put your bikes on a dyno, on average changing one jet size changed you air fuel ratio by......how much? I know its not going to by the same for every motor, pipes and engine mods will effect it, but it should be able to be used as a ball park figure.

I had 4 sets of slide needles laying around that came from Vmax/venture carburetors that were of course non adjustable. I had a set that showed promise when I tried them but a little to rich and no way to drop them 1 clip. I made a tool the thickness of a snap ring and added two clip settings...

Can anybody tell me what the air hole size is on the air correctors that we use from the kits like the muscle kit? I have another project on the burner and the mod monkey is back....LOL It would have to be something like .05 or 1.1. Any any reason the particular size is being used? Dyno tests?

I got tired of wondering if I was getting a correct charge to the battery. Also had an idle isse that ended up being poor charging issue. So......I ordered a digital voltmeter from eBay, made a housing for it from some old aluminum tubing I had laying around. I cut it to be about an inch long...

This is still in the beta testing stage, but so far it's working. I was getting oil in the air box after running high rpm. This in turn srewed up the paj1 and air corrector. So I came up with this. A 6 1\2 piece of 1 1\4 PVC pipe capped with three barrbed 1\4 connectors. I drilled the so called...

This is very interesting and almost affordable. http://roadstercycle.com/yamaha_vmax_fuel_injector_cv_car.htm

I made this to show that the vboost was opening on acceleration. The arm on the vboost shaft hits the button on the switch completing the ground circut for the light. Switch came from eBay and the light from radio schack I drilled a hole in the bracket on the vboost to lineup with the arm on...

I got tired of trying to get at the valve cover bolts only to be able to turn them a little at a time with an Allen wrench. So I cut a piece of Allen wrench found a ratchet wrench and pressed to sae nuts into the metric wrench. Drilled the nuts to the right size and using the vise pressed the...

Ok, need to pick a few peoples minds. The speedometer has a speed sensor in it that tells the turn signal relay a distance traveled so it cancels the turn signals. What kind of signal is it sending. A low voltage pulse? I put one of the cheapy Chinese speedometers on my vmax and now the turn...

Anybody making them yet? looking for a set if someone is making them or if you have a set for sale.

Looking for length of 1st gen venture rear brake rotor. Need something about 12 1\2 to 12 5\8. I think its the same bolt pattern as the vmax.

I have a Hindle old style big pipe, I took the can off to look at repacking it. Has anyone done one of these? No rivets on this one, looks like I might have to go from one end inside and try and drive one of the caps off.:ummm: If anything the end in the second picture would maybe pop off.

Soon the riding will be over here so I already am planning one of my winter projects. Building a 1300 for the max. What I have so far is a 1987 venture case with the crank rods and pistons in it. I am going to replace the rods with vmax rods. I have a complete set vmax heads and a transmission...

Is there a difference between a late 90s rear venture wheel and 1st gen vmax wheel ? can they be interchanged ? Reason I ask is I have a venture wheel laying around and am thinking of sending a wheel in to get the 17inch mod done. I like the looks of the venture wheel so if it would work I will...

Cant find the specs on FJ1200, XJ1200, XJR 1300 carb needles. I found a place that had adjustable needles for that model. Carb looks something similar to the max carbs. Anybody have any specs to see what they measure? thanks

anybody seen this http://www.ebay.com/itm/YAMAHA-VMAX-17-WHEEL-XJ900-DIVERSION-WHEEL-SPINDLE-CONVERSION-/261260816561?pt=UK_Motorcycle_Parts_13&hash=item3cd45bb0b1&vxp=mtr

Trying to find where my oil leak is coming from, maybe somebody has had the same leak. I drips when it is parked, by the left front foot peg. Just like a dog marking its spot. I have had the clutch cover off and new gasket put on it twice. I took it off and put gasket goop on it. I had the...

Turn signal extenders........Looking for some for my 85 vmax. I change to a different style turn signal and they don't extend out far enough on the front. Found some in Germany but they don't ship to the US.