Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Z

    BIG AIR KIT

    Now that this kit is available again does anybody have any expereince with it ? before and after dyno #'s ? Reading all the benefits come at the top of the rev limits and you loose some bottom end HP/Torque as well ?
  2. Z

    Ceramic Bearings ??

    Anyone try these here ??
  3. Z

    otec lock-up and still a little slipage !

    Installed the Otec lock-up clutch/pressure plate. Mostly in high gear ( 3&4 ) going to add some weight to 3 of the 6 arms. Approximately 30 grams, anybody else try tuning this set-up ??
  4. Z

    Air Induction System

    Is the AIS disabled with the Gurued Flash
  5. Z

    Fuels

    Anybody experiment with different fuels such as the infamous MR12 or lets say Methanol ??
  6. Z

    Handle Bar Risers

    Anybody using any handle bar risers or even some clip-on handle bars ?
  7. Z

    O2 sensor location ?

    I'm running a full Hindle system and a PCV with target tuning, seems like the O2 sensor is pointing slightly downward. Everything I've seen or read before suggests the O2 sensor should be pointing slightly upward or better. Should I be concerned about this or is it a non issue ??
  8. Z

    O2 sensor location

    I have a full Hindle system and the O2 sensor seems to be pointing downward slightly, anybody else see that on these systems?? Everything I've read says they should be pointing slightly up or better. Should I have any concerns, running a PCV with auto tune/target tune....
  9. Z

    Fuels ??

    Anybody experiment with other fuels such as E85 or MR12 or anything else ?? If so what was your experience ??
  10. Z

    wheel options

    So far only found BST's.
  11. Z

    Dyno numbers

    Installed the Hindle system along with the air box mod and ecu flash. 186 HP / 119 FT LBS of torque !! Sound about right ? Stock was 170 HP / 112 FT LBS of torque.
  12. Z

    Weight savings

    Where can you loose the most weight on this bike ?
  13. Z

    Stock Oxygen sensor

    I'm assuming it's a narrow band and is it disabled when you get the ECU reflashed ?
  14. Z

    Exhaust question

    Stock exhaust has the pipe collars at the head to center the pipe I believe, I have a Hindle 4-2-1 and I didn't get any with the new exhaust so am I suppose to use the stock one's or should've I got new ones supplied with the pipe ? Stock one's look like they been tack welded in place on the pipe.
  15. Z

    Quickshifter ?

    Seen a couple around, any stand alone units or just the Dyno-jet unit that requires the PCV to run it ??
  16. Z

    ABS

    Will the ABS system allow you to do a burn out ? Do you need to disable ?
Back
Top