Search results

4-1 hindle with shortened can, uni foam filter,raised Y ,stock jets. Operator let go a bit soon as i kept saying to be carefull about her not having rev limiter 😅

Hi Had a friend made some internal and external extenders to make the faz 1000 usd fork height suitable for the vmax,+10cm to be exact. Now,what is the oil calculations on these cases? Stock quantity?+10cm of oil? Thanks

So this was my aproach to a smaller tail light. Total cost was less than 15€, with ebay being the parts supllyer With no weldind,just bending

So... Is it really needed? I like the look of the rear,but not so much of the rear light. My plans is to buy an aftermarket aluminium licence plate holder and a small led licence plate light along with a led tail light.would like to be hidden as much as possible from the side,to look like it has...

Hello I am in the midle of doing this conversion but the friend that is doing this as some doubts... Do i use only the diff side of the hub and remove the rest(brake side) or spilt the hub in 2 and weld each side on the donor wheel?

Had a friend made me some new cans,to replace the scuffed stock ones for a cleaner look and more sound. They are 100% stainless steel so no more pitted chrome and have some adjustable baffles for the longer trips. I like

Had a friend made me some new cans,to replace the scuffed stock ones for a cleaner look and more sound. They are 100% stainless steel so no more pitted chrome and have some adjustable baffles for the longer trips. I like

hello going to get price for a custom slip-ons, same look as stock. should i ask to make a link pipe or is something that is no worth the work(and price)? what does it affect? thanks

as title says... anyone has different springs on their stock shocks? hyperpro sells progressive springs for the rear shocks,any benefits from keeping the stock shocks? or just toss them in the parts bin and go for a complete setup? thanks

hello bike had some issues holding idle,because ignition coils had seen better days... installed COPS and sync the carbs and all was well: no more misfires,starts easier and a very nice idle sound,like a diesel lope or a aggressive cammed engine,with the tach needle showing just that with a...

hello does anyone has the size of the oil seals and dust seals? or in lack of those the piston size? upgraded the master to a 19mm radial nissin but still more lever travel than i am comfortable with. seems some pistons are getting stuck,already removed the dust seals as they were shot but...

hello has anyone has some feedback on using the fzx (fournales type) shocks on the vmax? i have seen some pics on the net but was interested on the performance level compared to the vmax stock units. i know fzx ones are more tech advanced but the weight from the bikes are different...

hi my max has been acting up since i bought her. only charges above 2500 rpm,at idle or low rpm woudnt charge. thought i had a bad stator and sent to repair,but they tested it ok.looks new also.(bike has 8900 km 2001 model) yesterday i reinstalled the stator and went to check and here is...

as title says... need to get the front fixed and try to cure the high speed cornering wobble(all rest is ok,just stock vmax frame and suspension) and can get ohlins. i am from portugal and progressive springs wiil be at the same price or more but i dont know any feedback from ohlins...

hello new vmax owner,a 2002 model that had 8000km on clock but was sitting for a year due to a crash. after cleaning the bike i rode her the first time to see that when hot it would miss at idle up to 2000rpm. carbs shotgunned and same. went to see the voltage and it was only...