how I spent a couple days

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Fire-medic

Well-Known Member
Staff member
Moderator
Joined
Mar 25, 2011
Messages
14,825
Reaction score
3,922
Location
Miami Florida
I disassembled and cleaned/rebuilt a set of carbs. The enrichener plungers were very-sticky, but overnight in PB Blaster and they surrendered. I use an ultrasonic bath and a soda blaster, and whatever won't fully-release gets scotchbrite pad work and/or a bench grinder wire wheel.

I hope to install them today and see how they do. Stock jetting.

My work pace is too-slow to make it in a dealership. I'm retired, I don't care. :clapping::punk::thumbs up::moped2:
 

Attachments

  • VMax carb dirty float bowls.01.jpg
    VMax carb dirty float bowls.01.jpg
    65.6 KB · Views: 32
  • VMax carb dirty apart.01.jpg
    VMax carb dirty apart.01.jpg
    68.2 KB · Views: 32
  • VMax carb carb enricheners.01.jpg
    VMax carb carb enricheners.01.jpg
    86.7 KB · Views: 26
  • VMax carb to VBoost.01.jpg
    VMax carb to VBoost.01.jpg
    60.4 KB · Views: 26
  • VMax carb intake.01.jpg
    VMax carb intake.01.jpg
    63.2 KB · Views: 24
Did this to mine last week, first time. very intimidating at first but like you said very satisfying, and it actually helped. Now I know I can do it.
 
Back
Top