• If you have bought, sold or gained information from our Classifieds, please donate to VMAX Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Maxflow StreetPro 4-2 Exhaust w/ MegZilla Mufflers

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

user 16425

Member
Joined
Sep 28, 2018
Messages
14
Reaction score
0
20181211_122146-1.jpg 20180928_103448.jpg 20180928_103507.jpg 20180928_103531.jpg New in box, I bought it a wile back and ended up not using it as my max needed a ton of work and decided against doing it.
This is one of the first Megzillas made after the transition form UFO to Star Rider Performance. UFO called it the "John Pandure" exhaust I beleive. Anyways it's big, it's bad, it's heavy and probably the coolest looking and sounding exhaust you can get for a gen 1. It's also extremely expensive $1600.
Here's your chance to get one on the cheap. Like I said it's new. I just unpackaged it today to inspect it for damage and craftsmanship before trying to sell it. I repacked everything and kept all the original labels on the parts . It's all there and ready to go! This is a complete exhaust system (I didnt include pictures or all the pieces) ceramic coated inside and out. 2.5" Baffles with a stainless steel wrap for core material and 2.5" end caps.... THAT'S FOUR 2.5" BAFFLES!!!!
For details visit Star Rider Performance
http://starriderperformance.com/max...w-megzilla-mufflers-ceramic-coated-85-07-all/

$900 Free Ship to Cont. US.
This is my first time using the Forum. So bear with me please.
 

Attachments

  • 20181211_123409.jpg
    20181211_123409.jpg
    102.9 KB · Views: 64
  • 20181211_123610.jpg
    20181211_123610.jpg
    100.6 KB · Views: 62
  • 20181211_123924.jpg
    20181211_123924.jpg
    53.6 KB · Views: 63
  • 20181211_124723.jpg
    20181211_124723.jpg
    51.4 KB · Views: 62
  • 20181211_125913.jpg
    20181211_125913.jpg
    55.4 KB · Views: 67
  • 55131911__13219.1473784943.1280.1280.jpg
    55131911__13219.1473784943.1280.1280.jpg
    247.2 KB · Views: 75
Last edited:
Guessing the centerstand is a take-off w/this design? I have a UFO 4/1 and while it does not require the cutting of centerstand brackets like the Kerker 4/1, you do have to remove it. However, for servicing you can re-install it to lift the bike, but it needs to be removed to ride it. The UFO 4/1 I have uses what appears to be a very similar shape megaphone to what you show for this. I special-ordered it from Jon Cornell, and he delivered it to me, less-than a month before his death.

What are the megaphone dimensions for the small end and big-end, and the o.a. length?

Here's a rear shot, it's two, 2 into 1's.

I went to the Star site, it retains use of the centerstand.
Product Features

  • 1.5" OD
  • 0.065 Wall Tubing
  • Mandrel Bent
  • Hand Welded
  • Ceramic Coated Inside and Out
  • 2.0 or 2.5" Baffle Core
  • 3 End Cap Sizes Available
  • SS Clamps
  • Allows Full Use of Center Stand
  • 100% MADE IN USA, NORTON, OHIO

55131958__23809.1473784942.1280.1280.jpg

55131911__13219.1473784943.1280.1280.jpg

I see a bit of resemblance to the original SOHC Honda 750-4 profile, in the exhaust.
 
Last edited:
"What are the megaphone dimensions for the small end and big-end, and the o.a. length?"
I will measure the inlet soon. For the big end the baffle core and cap (hole in cap) is 2.5 inches i belive. Do you want over all max diameter of the muffler? I will also post pictures of dimensions measured.
 
"What are the megaphone dimensions for the small end and big-end, and the o.a. length?"
I will measure the inlet soon. For the big end the baffle core and cap (hole in cap) is 2.5 inches i belive. Do you want over all max diameter of the muffler? I will also post pictures of dimensions measured.

I was wondering the megaphone cap width dimension, and the i.d./o.d. of the opposite end, where the connector pipe is, and the o.a. length of the megaphone, end-to-end. Thanks.
 
I was wondering the megaphone cap width dimension, and the i.d./o.d. of the opposite end, where the connector pipe is, and the o.a. length of the megaphone, end-to-end. Thanks.
I attached photos to the post.
The photo with a measurement of 3.970" is of the caps major diameter. I tried to remove the caps as they are removable, but was unable to get them out without scratching them all up. So I was unable to measure the minor diameter (the end of the cap that slides in and butts up against the mufflers core) but I would estimate that to be about 3.920".
 
I attached photos to the post.
The photo with a measurement of 3.970" is of the caps major diameter. I tried to remove the caps as they are removable, but was unable to get them out without scratching them all up. So I was unable to measure the minor diameter (the end of the cap that slides in and butts up against the mufflers core) but I would estimate that to be about 3.920".

Thank-you for your posting the dimensions.
 
Hello,
Is this exhaust system still available?
If so , please send me your phone number so that I can call you to discuss further
Thank you,
Darrell Holyk
1-780-619-1300
 
I’ve posted a Quadzilla, never used here and no takers. Looks like its an Ebay item if one wants to sell it.
 
I'm in no hurry to sell, Its been new in box for three years now, it can spend another three for all I care. Maybe by then I'll have my max fixed up enough to put it on :D
 
anyone has a video of this exhaust pipe? thank you
 
I have never been able to find a video for it. UFO and Star Rider never made a video for it. ODD considering the mount of money they ask for it new.
 

Latest posts

Back
Top