motion

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. vmax2extreme

    Motion Pro SYNCPRO Carb Tuner -SOLD-

    I have a Motion Pro SYNCPRO carb tuner that I've only used a couple of times. $70 + shipping
  2. J

    Motion Pro Syncpro Carburetor Tuner & the Max

    well I got my Motion Pro Syncpro Carburetor Tuner today. I calibrated it like the Video said.....I put the Brass Restrictor plugs at the bottom of the hoses so they would be close to the carbs, and......................it worked Perfect ! No bubbles, no fluttering. I revved it up to 4500 and...
  3. caseyjones955

    They are at it again, I see a pleasant trend in motion.

    http://www.eater.com/2015/7/7/8907615/australian-restaurant-bans-children
  4. Caleb_M

    Motion Pro running really high

    Hi all! Question about the motion pro carb sync tool. I'm using the # 08-0411. I was trying to sync them today, got the bike warmed up attached the tool, but the fluid damn near goes to the top of all the meters. In some of the vids I've checked the meters only seems to be going about 3/4 up...
  5. gamorg02

    Motion Pro Wheel Bearing Remover

    link: http://www.motionpro.com/motorcycle/partno/08-0269/ pic: I've had this remover for a few months now and honestly it makes removing bearings super easy. Used it effortlessly on a vstrom, ducati, vmax (front) and hawk GT wheels. Only had one bearing I couldn't do but when i went to...
  6. Traumahawk

    Motion Pro carb tool

    I just bought this because I was looking for the perfect screw driver for the A/F screws on the Vmax. Got it in Saturday.....It fits PERFECT!!! The price isnt too bad either. Its definately cheaper that having to replace stripped screws...
  7. dekberg

    Motion Pro Fluid

    My Motionpro carb sync tool is low on the "magic blue fluid". Is there some other fluid that can be used or do you have to use their special formula. I don't mind ordering it....just a little curious. Thanks
  8. hijacker

    Bikes in Motion

    I love pictures of bikes in motion. Here are some pictures I've taken of myself and my buddies with my GoPro. You guys have any pictures of yourselves or your buddies while actually riding? Tom... Mike... Shelley... Me...
  9. charlieRobinson

    Shifting from neutral to 1st - jerking motion

    When I am a stop and I go from neutral to 1st I almost always experience a forward jerking motion on the bike. As I have no prior bike/riding experience; is this normal? Does even sound familiar to anyone?
  10. mymax04

    motion pro maintenance

    so I found my sync tool that had been sitting in a box for 2 years, probly been hot and cold a couple of times & its clear that it need fluid added. so I find some methenol (figured it would work since its blue and not just water) and added it in proper spot but when I slid the tube back down in...
  11. G

    Motion Pro Carb Sync Tool

    Question I want to bounce off you guys. I have the Motion Pro Sync Tool and the fluid in one of the chambers is low on fluid. I know they make the refill fluid, but no one around here has it. It's like $5-6 online and then shipping is over $6. Not that $6 will make or break someone, but I...
  12. SpecOps13

    Motion Pro, Sync Pro (SFD)

    I picked up a Motion Pro a while back to use in place of my Ancient Mercury Manometer. All has been well until today. I noted that the fluid, over time was gradually traveling higher and higher in the tubes and that #4 was now at it's adjustment limit. Calibration was one of the big selling...
  13. Bacchus

    slow motion turn over...

    the '85 project bike is turning over....sloooooowwwlllly.. very very very slowly.... gotta bump the starter to get past the compresson stroke. I had the strator cover off recently and I saw another post on this where sean said "if you havnt had the strator cover off recently, proceede with...
  14. mattness

    slow motion bike crash test

    cool http://www.youtube.com/watch?v=WEjfUjd9nMc&playnext=1&videos=kB733paz1qo&feature=grec_index
  15. gamorg02

    Motion Pro questions...

    Hey all quick question for those who use a motion pro. I picked up one that was new still in the package for $40. Should have done my research first I guess tho. The guy had it sitting around for years so its the mercury model. Right now i only have a 2-port sycnh tool so this would def help...
  16. KJShover

    Motion pro recall

    SAFETY RECALL NOTICE Dear Motion Pro Customer: Motion Pro, Inc., has decided that a defect which relates to motor vehicle safety exists in some of its aftermarket motorcycle brake levers with Part Number 14­-0415. However, the problem associated with this defect can occur only when...
  17. VMAX1

    Motion Pro ?

    Mercury model, restrictors are in place closest to tool, my readings are very jumpy, will postioning the restrictors closer to carbs steady the readings? Thanks, Tom
  18. B

    Sync Troubles with Motion Pro

    I purchased a Motion Pro non-murcury model today to sync my carbs. I followed the instructions that came with it carefully. The first step is to syncroize the tool with the non-adjustable carb first, then adjust the others based on that. The only problem is, when I turn the bike on the fluid...
  19. C

    Motion Pro carb sync guages / *HELP*

    Hey folks, I finally found some places on the web that still carry the economy/deluxe models with the mercury, but nobody will ship one to me. Does anyone have any good ideas on this issue? The economy one can be had for under $45 at most places I found. Maybe someone reading this post could get...
Back
Top