case

hello all, im not quite sure but i am replacing my case cover gasket stator side and a piece fell out not sure where it goes????? :confused2: pics attached

I noticed the crankcase cover on the left side was dripping oil. I ordered and replaced the O-ring and the large gasket, but still have a oil leak, and when I pull the cover off it looks like its coming from the center area. Does anybody have a suggestion or recommendation of what else to check.

Looks like the lower case in the 1570 motor is trashed. You can see the abrasion on the mating surface near the main case bolt holes. This case has been squirming for a long time.

I am building Hybrid Venture this winter. I am using an electronic dash from a 97 Royal Star that requires the hall effect sensor mounted in the final drive. The VMax final I have does not have the boss on the casting for mounting the sensor. If someone has a case they would part with...

Bump

I just bought my vmax not too long ago and I noticed it has 4 K&n filters and the oil cap has a breather hose going up to a plastic canister and it feeds into the filters. I was wondering what this is for because most other vmaxs don't have it and I kinda wanna take it off if i can.

Hi folks: Question re. reattaching the pickup units that mount around the stator: The screws that Yamaha uses to attach these pickup units appear to be crappy soft metal (SO soft that I broke one of those screws while backing it out from the crankcase cover!) So, my question is this: Is...

When I get into something, I generally go at it all the way. Thought I could survive this with 2 VMax's. I have an 89 and a 94. The 94 runs perfect and it's about as far as I want to mod it. The 89 is a Gnats Ass from being at 100%. Well, I thought then, I'd flip the 89 and buy a Gen II but...

We submitted an application to adopt one of these dogs....I got a call this morning from them saying we were approved and I'm heading over to the shelter at 1:30 to meet the dog they selected for us. Pretty exciting stuff...

Well my 2004 finally shook the bars hard enough to get my attention today on the way home from work. It happened as I changed lanes and encountered an uneven section between the two lanes at about 65 mph. Luckily a hand full of throttle lightened the front end enough to regain composure. I have...

So i found an 85 about an hour away. Its in pretty rough shape. The motors blown and a lot of it is dissassembled and in boxes. Also most of the body is pretty beat up looking so no real value there. I am contemplating picking it up as a spare parts bike and also parting some of it out to make...

Ok, guys spent my thanksgiving carving the turkey so to speak... my '85 is fully dis assembled. I have the motor mounted up on a engine stand and I am hoping to get the case halves split today. my question is : whats the best way to separate the lower case half? motor right side up dropping...

Sealant, casehalves, Yamabond, Threebond I will be joining my case halves shortly.. Which Yamabond,Threebond permatex..etc.. has everyone used/recommend? Buddy at local shop uses Yamabond 4..And sells it buy the case to the Harley shops :) Found on Ebay that Threebond has 1194.. Supposedly...

I have now in my garage a 2003 european version v-max. Bike has multiple damage couse car hit. Frame was extremaly bent from the right side. In the result engine was moved about 2cm to the left side, covers were crakced into pices and another damages but they not critical much... Anyway, owner...

Watched enough videos to get the camera bug and try it myself.Not something I'd do every day but I thought it was kinda cool,my daughters really got a kick out of it.I used wire ties on my digital camera to the top of my case guard.I was a little bored,later...

Anyone have a right side OEM case guard in new or close condition? I know this is a long shot but need the right side one. Surely someone went down on the left and bought a new set and has an extra right one.... :eusa_pray:

Well, been doing some tuning on the bike to get it up to par before the big races in two weeks. We had taken it to the dyno day in Topeka and with v-boost closed off and 162.5 main jets (and our jet kit) I was way rich and pulled 116 hp 84 torque. We changed the jets to 155's and opened the...

Where is the best place to get the factory case guards from?