ignitech

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. StanVM2007

    Ignitech TCPI4 baseline curve for 2007 stock bike

    I just installed the Ignitech TCPI4 v96 on my 2007 stock bike. I'd like to have and use the stock CDI curve as a baseline for having a reference point, experimenting and resetting. I can't find it anywhere.. Someone mentioned Dynatek 'Curve2' as a good start as well. Is there a converter that...
  2. Osiris

    Ignitech start point.

    I recently recieved a Ignitech kit. Install was fairly simple. Programming is a bit more difficult. With the kit came a disc with what I assume are programmed set-ups. When I try to upload a set up I get a text (key). Which I don't understand. I'm just trying to get a starting program for...
  3. redneksoldier

    Ignitech quickshifter

    I've been using an Ignitech unit for a few years, now and this mod has been in the list the whole time. I had plenty of setbacks the last few years with trans and motor problems, raising babies, etc. But I finally got some time in the shop to tinker with it. Made a bracket to fit a microswitch...
  4. S

    Dead Ignitech unit.

    Ok...so the Ignitech is not working. Went to Johns yesterday and after warming up a max we swapped out the stock cdi for my igni...no spark. Stock back in....fired straight back up. I've emailed Garry to ask if he still has a contact at Ignitech...going to call them today regardless...see uf...
  5. blaxmax

    Ignitech

    1.Sorry this thread was hijacked, members can contact me for the info and I will gladly send it. Once again you respond without reading------ I am not finished Downloading it all and with your lack of patience and badgering I will send to those who need it. IGNITECH - Jiří Krejzl...
  6. G

    Question for Ignitech users

    Wasn't quite sure where the topic fit, so here will have to do. For those with an Ignitech hooked up and running their V-Boost, Does the ignitech unit run the same servo test at start up as the stock unit? I'll be putting my ignitech on this winter and was just wondering if I should (or should...
  7. L

    Ignitech installed and did Coil On Plug conversion.

    Tore the old Venture completely apart. Install the Ignitech on top of the now empty coil rack. Perfect fit between mounting ears. Made conversion wired for coils. Set the box for short dwell and one revolution before spark. Fired it over and runs pretty nice. Box is set for you Vmax guys. Have...
  8. O

    Need info on Ignitech Ignition

    Would like to find out info on the Ignitech Ignition. The Cost, is it a plug and play unit or is prior programing necessary, what is needed to install, are changes to stock wiring needed, etc. Can't find a web site with solid info on the unit.
  9. Traumahawk

    Am I imagining this?

    Does this look like an Ignitech being sold on UFO's website? http://planetvmax.com/85-07vmax/motor/ignitor-box/
  10. Traumahawk

    Timing increase

    Edited for content
  11. dingy

    Ignitech TCI group buy

    I am working on getting another group buy together for Ignitech replacement TCI's. If interested PM me. $255 USD, includes priority shipping to USA address. $7.00 for PayPal payments. I don't want to get personal marked payments as PayPal will get irritated with many of those coming in. I will...
  12. dingy

    Ignitech TCI purchase opportunity

    I finally sold the last of the Ignitech units last week I got in December and have had several requests for more. This TCI will fit 1st Gen VMax's from 1985-2007. For the 90-07 year bikes adapter cable & program in TCI are different due to single pickup coils. Full instructions & pictures...
  13. dingy

    Ignitech TCI purchase opportunity

    I finally sold the last of the Ignitech units last week I got in December and have had several requests for more. This TCI will fit 1st Gen Vmaxs from 1985-2007. for the 90-07 year bikes adapter cable & program in TCI are different due to single pickup coils. Full instructions & pictures...
  14. dingy

    Aftermarket TCI 85-07 - Ignitech - New

    Replacement Ignition Control module for 1985-2007 VMax's $255 USD, includes priority shipping to USA address. TCI will be configured for specific year of buyers bike through adapter cable & software setup. Ignitech TCI features: Timing advance can be programed based upon RPM's & vacuum...
  15. dingy

    Ignitech TCI group buy feeler

    I have a few members interested in getting an Ignitech 1st gen TCI. Main thread on this aftermarket TCI is located at link below. http://www.vmaxforum.net/showthread.php?t=21415 http://www.vmaxforum.net/showthread.php?t=19130 There was an issue with the prior group of TCI's to be upfront on...
  16. C

    Ignitech ignition module

    Anyone know where to get these in the states? From I ve seen they are located over the pond area. Thanks Todd
  17. wildweasel_pt

    The IGNITECH TCI thread

    Hi all I recently bought one of these programmable IGNITECH TCIs from Gary on a group buy here. Im opening this thread for all of you that got this setup to post any issues and things you find relevant or that you find out along the way of installation and use. I knew from Gary that one guy on...
  18. dingy

    Second Ignitech Aftermarket TCI group buy

    I have had some members express interest in getting an Ignitech TCI. I did the first one in August 2011 and 6 members participated in it here. I have not had any issues with them reported to me. If any of the guys that got them would like to post their experience with the TCI, it may help...
  19. dingy

    Ignitech programmable TCI-plug & play group purchase definately happening

    I have enough commitment and 6 payments already in hand to definitely proceed with the Ignitech module group purchase. Original thread with some more details linked below. Please note this thread has reference to a used MAP sensor which is not going to be the case (will include new MAP...
  20. dingy

    Programmable TCI - plug & play group purchase feeler

    I am checking to see if there would be enough interest from members to make it feasible for me to buy about 10 (or more) of the Ignitech TCIP4 V80 TCI ignition modules. These units would be a 30 minute or less job to install & be riding with. I would get these units from Ignitech, pre-load a...
Back
Top