info

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. bud7680

    looking for a few little pieces and parts and info

    I need to get some bolts to attach the R1 rotors to a spare wheel. I have seen this info. somewhere on here and can't remember where. I need all 12. Can I buy them at the hardware and if so what am I asking for. I guess I could take one off and take it with me but pita! Also, am looking for...
  2. wildweasel_pt

    Need some info on ZRX rear shocks

    Hi all I did several searches but i couldn't find any post with this info. Im considering installing ZRX shocks on my bike to raise the tail a bit. I need some feedback on those shocks. Can anyone with them installed chime in? Thank you in advance...
  3. B

    Need info on length of stock throttle cables??

    I currently have drag bars on my max and am quite sure the previous owner had the throttle cables custom made shorter than stock. I want to install the 2" wider than stock handlebars from Pythonmotorsports, but the throttle cables I have on there now are a little too short. I'm wondering if...
  4. VMAX1260

    need info for chaindrive conversion

    a friend of mine has a complete rear end (swingarm, rims brakes ohlins shock) from a vfr 750 which i could use. how difficult is to make the conversion. if i purchase the basic kit from pcw http://www.pcwracing.net/page2.htm will i be ok ?. i know i have to mod the tank. what else should i need...
  5. SpecOps13

    Info That May Save Our American Butts.......

    Click The link and see why.....:confused2::rofl_200::biglaugh: http://www.speedtrap.org/
  6. F

    ATV Info

    I guess its OK to put this here. I'm new to the forum and can't really provide much info on the Max but I do have a fair amount of experience on ATVs. If someone needs some help/info on an ATV, let me know as maybe I can help. Rick
  7. mattmullins

    need stage 1 jet kit info

    I'm going to do one I have supertrapps open end caps k&n stock box 8mm taylor wires, should I use 147 or 150 mains where should I run the clip on the needle any info would help
  8. mattmullins

    need info on the dyna 3000

    Was wondering if any body has this did it make a difference. Do you need resistorsin the wires since the plugs have them
  9. mattmullins

    supertrapps open end caps info

    I. Bought a set off ebay with open end caps anyone ever ran these and what was the result did you run a jetkit what was your dyno numbers
  10. mattmullins

    want info on supertrapps and ufo exhaust

    I'm going to get one or the other this week, want to know if anyone has these and there thoughts on power gains . I know they both sound mean but are the ufo's worth the money, how much gains do the supertrapps give they say they are dyno proven but can't find any thing.
  11. VMAX1260

    carb overflow, need some info for fcr's

    sometimes when i push my engine to the edge, fuel is keep comming out from the overflow vent. i have installed fcr's 5 months now and i dont have the slightest idea, where the overflow bowl is and when i open it how is it like. My thought is that when i turn the throttle all the way something...
  12. VMAX1260

    i want this callipers....BADLY cant find info nowhere

    ok i was googling and i run into these. LOL they are AWESOME 6pot radial. sure yamaha's but the thing is that the 6pot calipers of R1 OR VMAX'S 2009 are not like this. the thing you see gold , on r1 and vmax is silver and they are placed in the oposite side. you cant see it because they look at...
  13. V

    COPs info

    Hey guys I have denso cops I purchased from ebay.I know there is a member on this site that sells plug and play harnesses for 70-80ish bucks i think but if your like me I enjoy building and researching my own stuff when possible.So with the help of the net I can tell u the denso pigtail end of...
  14. timscues

    Info on ?UFO Vmax Quadzilla? Dual Slash Cut

    Getting ready to buy the UFO Vmax Quadzilla? Dual Slash Cut and just checking to see if there are any pro's or cons to this exhaust. Thanks for the help
  15. Heretic

    Interesting info from the powder coaters

    So I dropped some stuff off at my local powdercoater and told him that I laid the bike down and rashed one of the scoops over the summer. I Just put some body filler on it to smooth it out and painted over it. I asked if there was some kind of metal filler I could use and then powder coat over...
  16. CaptainKyle

    Internet Info

    I found this site that gives out personal info if you go down to the bottom right corner you can remove your self. http://www.spokeo.com/
  17. train460

    2011 Eureka Springs rally info

    Looking at it and will plan for the rally in the ozarks in eureka springs Arkansas for June 17-19. If you really like to ride twisties and canyons, this is the rally you need to make. Also try to get into town by friday early as we have a 125 mile ride planned into Missouri that will be a...
  18. Redbone

    Help with Vendor Info

    Has anybody had any experiance with Vmax Motoren Raats? http://www.v-max.nl/#
  19. B

    Shot in the dark-immigration info pls

    do we have any US immigration lawyers here,or people who have been through the process?My brother is on a H2A agricultural visa,my parents are both US citizens.He is married and they have filed a 130 form on his behalf in order to obtain permanent residence. My mom has cancer,they gave her 4...
  20. S

    Need some security camera info

    Anyone have any security systems or knowledge about these? I'm going to put one up soon. These all look like they'll about do the same, to me. It appears they'll look out over 40'+ in the dark. My big question is about how much recording time would I get? Thanks, Mark...
Back
Top