kit

I was wondering this and wanted to ask for a while now... I have Sean's Kit installed but there's a lot of work to be done before she's Dynoed and tuned. Should a Kit make a noticeable difference in sound? I was already running Jon's Slashcuts 4-2 which were already tuned and Jetted and she...

I bought a morleys muscle kit, I needed to add four New diaphrams ( wasn't expecting that but 3 had a few tiny holes). I can't believe the improvement, the throttle response Is much better AND the exhaust note is way better , sounds meaty as. A big thanks to Sean Morley , excellent...

I was about to buy the usual racetech products when a mate sent me a link to the progressive website for monotube cartridge kits for his Harley. Does anyone know if any Harley forks are the same length/diameter as the post 93 Vmax forks? Could be another option for us if there is...

I just installed Gannon's cop kit. When I was done bike wasn't starting so I went back through and checked and rechecked all connections. I got it started and it runs great once running but hard to start every time. Bike. Has always started very quickly before. No issues with anything I was just...

Hey I am not familiar with all of the vendors but my 2010 Vmax is in desparate need of modifications... So ill be posting videos/pictures from stock and up. One question is what is a good recommendation for a 240 wide tire kit?

Hi I am in Australia and the design regs over here are killing me... Amongst some other more decorative mods i am after doing, (and i know this will wind some of you right up) is a hard tail. Apparently this is frowned upon by the licensing authorities over here due to the size and weight of the...

Hi guys . On the third season decided to make tuning the carburetor. And he bought a set of FactoryPro CRB-Y11-1.1-Ti and ordered him to needle jet CRZ-EMU-14941. It seems everything is just translated the instructions ... but to the end and did not understand the sequence settings...

I need to replace my valve cover gaskets so, I figured it would be a good time to check the valves. I asked Sean if his valve shim kit was available. His response was ,"I wish". He is having problems getting the kits returned. I'm not sure of the whole story or who has these kits. I...

I just finished installing the Morley HD oiling kit in a 1986 with the engine in the bike. I did this while installing a new clutch so I decided to go a bit further and do this. The results were spectacular. No more knocking mains at slow idle. (this is NOT your front exhaust pipes as it...

I was thinking about adding a LED light accent kit to the bike. Once I started shopping, I quickly got confused. :ummm: There are so many kits available, I'm not sure what way to go. Has anybody added LED's to their bikes? Any help on helping me make a decision will be appreciated.:punk:

Hi guys, Has anyone got a good setup using factory pro y11-10 kit? In the big picture, I want to go stage 7 with pods, but now I've got a stock air box, drop in k&n, ufo headers and mufflers. I'm using dynojet stage 1 needles, when I used the factory-pro needles, it would splutter at 6k, then...

Have you guys seen this? This company is in Germany and at 65 Euros that works to about $100.00 I might just try to fab out my seat.....

Okay guys and gals, I know this has been discussed on here somewhere. Mods feel free to move this thread where it belongs if this area is not kosher for this discussion. I have a 2014 sitting in my warehouse with good weather arriving this weekend. I normally do my own maintenance work myself...

Hi everyone.. Its been months since ive been on the VMF. Ive been riding like a Hooligan and loving every minute. I have a new Samsung Galaxy s4 phone and the VMF and Sean's site don't work well at all.. For example everything goes screwy when I try using search.. Anyhow.. Two questions.. Id...

Hi, I'm trying to get morley jet kit working with stock needle at sealevel. The stock needle doesn't seem to have adjustment possibilities. The bike pulls great with WOT at 5-7k, but when I'm not really full trottle, 2/3 of WOT maybe and going through 5-7K, it's very rough and there's a...

Is anyone running this set up? If so, opinions? and is it a good idea with a stock Vmax with slip on Super Trapps or will I have to play with the A/F and the Pilot Jets?

I haven't started on it yet, so it may be obvious when I get into it, but what's this?

Hi, Just though would put this out here if some one's interested :) http://www.holeshot-racing.co.uk/images/pdfs/turbo-charging/tbikeyamvmax85_07.pdf anybody used these?

I ride 70 miles a day, round trip to work and I work 2nd shift. Well last night on my way home at midnight I realized that I have zero tools with me, and how bad it would suck to be stranded. Even with tools if she goes down I'll still probably have to hide it somewhere and come back for it with...

Hi, I just installed Morley Jet kit and now it sucks at higher RPMS, I cant even get to 6000 RPM. I did this while i was cleaning my carbs and my new exhaust hasn't arrived yet, so it's still on stock exhaust. The problem is i read CV carb tuning guide and it says if it doesn't pull well my...