length

Looking to get a ballpark measurement for the fork spacer with my new setup. I just threw in some progressives, a set of ricor intimidators, new seals, and oil. I did a 1" drop so according to the progressive chart the spacer length should be 8.37" or something like that. The inimidators are...

I've been thinking lately and Im just curious exactly how much my swingarm is extended. I didn't get a lot of good detail when I bought the bike. The previous owner was a bit out there and had not done all the work himself so he was pretty useless for details. I have slowly been discovering what...

I've got a set of 4-2 Mark's headers on the way, and am looking at the Level One Racing exhaust for the satin black GP mufflers. http://www.leveloneracing.com/ The two lengths I am considering are their two.six.zero (10.25") or the three.three.zero (13") canisters. All of their mufflers have...

Does anyone know the length of the stock spacer in the front forks of a '94 Max? I pulled mine apart to fix a leaky fork seal and found the previous owner had scabbed some PVC pipe in place of the stock spacers. I would like to start fresh with the correct length spacer while I rebuild these...

Just bought a set of used Progressive springs on E-bay. Cleaned 'em up nice & shiney & popped my old springs out. That's when I noticed the difference in size - the "new" progressives are the same diameter as the factory springs , but are only 15 inches long, whereas the factory springs are much...

Hello how long are the original spark plug leads for each cylinder...give or take?

:ummm: Can anyone give me a ballpark spacer length to start with when using the progressive lowering kit and emmulators? I tried what one person posted and the spacer stuck out of the tube about 3" and couldn't even push it down to get the fork cap started. Seems a bit much to me. Thanks...

What is the OE rear shock length? 13" or 13.5" Thanks, Daniel

This is kinda dumb but can someone that has a totally stock later model front end measure the distance between the top of the slider (where the dust seal meets the inside tube) and the bottom of the bottom triple tree where it pinches the inside tube? I've been in these forks so many times I...

For you guys that have a Kerker 4-2-1 Kerker exhaust system - what is that length of the can - mine is in storage so I can't measure it right now. Thanks Mike

I don't have a Vmax and I need to know: How long are the standard forks? I mean from the top of the fork to the middle of the axle hole. I can't find the data on the web, so if anyone could post it for me that would be cool -- Thanks!