settings

Who here is running Progressive 440's? I'm a newbie v-max owner, and mine came with pretty much brand new 440's (stickers are still on them). They were set as soft as they could go, but I figured I'd like them a little stiffer than that. I turned them each 5 full times (1/2 of the range) and...

I'm a novice mechanic for the most part but the owner that had the bike before me was as mechanically inclined as Homer Simpson.Is there any ballpark setting for the PAJ 1 and PAJ 2 screws?I'm pretty sure he had them turned all the way in when i first took the carb apart so i have no idea of the...

I need help. I've spent all morning researching all the posts and stickies and just get more and more confused. I've seen about three different methods of measuring float settings, and a slew of different numbers. I'm confused how a setting of 1.125 equivocates to 15, 16, 17mm's since...

lads i know this has been asked loads of times before but my 95 max is running rich very rich :bang head: I have a K & N fillter and supertrap slip ons any one know what needle sizes and setting i should be running just to get me some way close

I need input on this issue :confused2: I have progressive springs fitted inside 40mm ('88 model) fork tubes. The forks are lowered with 2 x 1" lowering springs per side. Fork oil is 10 weight. Forks are also fitted with Race Tech cartridge emulators set at 2 turns. Air kit is still fitted...

I noticed a lean surging from 4-5000 rpm so lowered PAJ2 to Mikuni 165. Also, when romping on it at 4-6000 rpm there was some good vibration so I raised the needle to 2 1/4 clips....up from 2. I haven't tested that yet, it's raining pretty good right now. So...here's what I have. Mark's...

Hey guys, this may be the dumbest thing youve ever heard but i do NOT understand the adjustments on the back shocks. What do they do exactly? I keep mine set on 4 i weigh 270 pounds. Thanks in advance because i know ill get damn good answers!